Overview
The Crown Automotive CRO52111596AA is a non-CV front drive shaft for the 2002–2007 Jeep Liberty (KJ). It is a direct-fit replacement front driveshaft at stock length, and it does not need a slip yoke eliminator. Liberty KJ owners replacing the front driveshaft can match the part number CRO52111596AA against their original shaft before fitting.
Crown Automotive makes and distributes replacement parts for Jeep vehicles, and this front shaft belongs to its KJ replacement range.
Key features
- Direct-fit replacement front drive shaft for the 2002–2007 Jeep Liberty (KJ)
- Non-CV (non constant-velocity) design
- Stock length rather than an extended-length shaft
- Does not require a slip yoke eliminator
- Installs in the front driveline position.
Front driveshaft care
A front drive shaft transmits power to the front axle through universal joints that flex as the suspension moves. Because the joints carry the load through every angle change, worn joints are the usual cause of vibration, clunks and binding in the driveline.
Inspect the shaft and joints regularly, especially after off-road use or driving through water and mud. Look for grease leaks, rust on the yoke, and play when you rock the shaft by hand. Keep the joints lubricated and address any looseness early, since a failing joint can damage the shaft and surrounding parts.
- Check for grease leaks at the joints
- Rock the shaft by hand to feel for play
- Look for rust or damage on the yokes
- Inspect the front axle seals while the shaft is out
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO52111596AA |
| Position | Front |
| Length | Stock |
| CV / non-CV | Non-CV |
| Slip yoke eliminator | Not required |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2002–2007 Jeep Liberty (KJ) in the 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition and Sport trims.
It fits the 2002–2007 Jeep Liberty (KJ) in the 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition and Sport trims. The Jeep Cherokee (XJ), Wrangler (TJ, LJ or JK) and Grand Cherokee use different driveline parts, so this shaft is for the Liberty KJ only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shaft is non-CV at stock length and needs no slip yoke eliminator, so no transfer case modification applies. Support the vehicle on jack stands before working underneath.
What’s included
Look over the parts you receive and compare them with your installation before starting.
Not included: Check hardware and fasteners before fitting.
