Overview
The Crown Automotive 5357391R is a front brake rotor, supplied as the rotor only, for 1974–1979 Jeep Cherokee (SJ), J10 and Wagoneer (SJ) models. It is a direct-fit replacement.
The 5357391R is a front brake rotor supplied as the rotor only, with no hub in the box. Its finish is uncoated and its type is replacement.
Key features
- Rotor only, without a hub
- Front-axle position
- Direct-fit replacement type
- Uncoated finish
Hub and rotor fit-up
Because this rotor arrives without a hub, the hub face and bearing setup on the vehicle decide whether it bolts up cleanly. Clean the hub face and remove any rust or old rotor material before fitting. A rotor that sits crooked on a dirty hub can cause vibration that is often blamed on the brakes.
Full-size Jeep front ends from this period are often serviced with new pads and bearings at the same time as the rotor. Check the wheel bearings for play and the seal for leaks while the hub is apart. Rotors that are reused should be measured for thickness and runout before refitting.
- Clean the hub face before fitting
- Check bearings for play
- Measure a reused rotor before refitting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5357391R |
| UPC | 848399042832 |
| Part type | Front brake rotor (rotor only) |
| Position | Front |
| Type | Replacement |
| Fit type | Direct fit |
| Coating | Not coated |
Vehicle fitment
It fits the 1974–1979 Jeep Cherokee (SJ), the 1974–1979 Jeep J10 and the 1974–1979 Jeep Wagoneer (SJ).
The full-size SJ models are covered here; the compact Cherokee (XJ) and CJ models are not. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front brake rotor, rotor only.
Not included: A hub.









