Overview
The Crown Automotive 52060049K is a left hand drive drag link assembly running from the pitman arm to the steering knuckle on 2007–2018 Jeep Wrangler (JK) models, in both 2-door and 4-door versions. It mounts at the front position.
The kit includes two tie rod ends and an adjusting sleeve with hardware. The listed JK trims include 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X, plus the Unlimited versions of those trims.
Key features
- Drag link from pitman arm to steering knuckle
- Left hand drive configuration
- Two tie rod ends included
- Adjusting sleeve with hardware included
- Fits 2-door and 4-door JK models
Drag link and steering geometry
A drag link carries steering movement from the pitman arm across to the knuckle, so its condition shapes how the front wheels respond. Because the adjusting sleeve sets toe, any slack or stiffness there changes tire wear and straight-line stability. Having both tie rod ends and the sleeve on hand when the job starts helps the front end go back together cleanly.
Trail use puts more stress on drag links than street use, since rocks and ruts can bend the link and work the joints. Check the link after hard trail runs, and look for bent tubes, cracked ends and grease leaks. Tight, clean joints last longer, so re-grease the ends at each service.
- Check toe after any drag link change
- Inspect the boots on both tie rod ends
- Look for play at the pitman arm and knuckle
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52060049K |
| UPC | 849603003489 |
| Position | Front |
| Drive | Left hand drive |
| Connection | Pitman arm to steering knuckle |
| Body style | 2-door and 4-door models |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited versions of each.
The JL generation and the earlier YJ and TJ Wranglers are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The adjusting sleeve comes with its hardware, so the toe setting is made through it. Have an alignment shop check the setting once the drag link is installed.
What’s included
- Drag link assembly
- 2 tie rod ends
- Adjusting sleeve with hardware









