Overview
The Crown Automotive 52006592 is a drag link tie rod assembly that connects to the right steering knuckle on 1991–2001 Jeep Cherokee (XJ) models.
The adjuster sleeve and the pitman arm tie rod end are not part of the kit, so they need to be sourced separately if your steering setup needs them. The kit is designed for Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims.
Key features
- Drag link tie rod to right knuckle connection
- Listed direct fit for the 1991–2001 Cherokee XJ
- Adjuster sleeve not included
- Pitman arm tie rod end not included
Setting toe after installation
The drag link is the steering piece that moves the wheels in step, so any looseness in it shows up as wander, pull or uneven tire wear. Replacing this link changes the toe setting, so plan time for an alignment after the part is in. Sourcing the adjuster sleeve and the pitman arm tie rod end before starting avoids stopping partway through.
When the old tie rod is removed, look at the knuckle taper, the boot and any cotter pins before reusing them. Worn ball joints, a bent steering arm or a loose pitman arm can make a new link feel wrong even when installed correctly. Tighten fasteners to the torque shown in your service manual.
- Check the adjuster sleeve threads before reuse
- Look over the pitman arm for play
- Inspect the knuckle taper for wear
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52006592 |
| UPC | 848399013849 |
| Connection | Drag link tie rod to right knuckle |
| Not included | Adjuster sleeve, pitman arm tie rod end |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1991–2001 Jeep Cherokee (XJ) in the Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims.
Wrangler, Grand Cherokee and other Jeep models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Since the adjuster sleeve is not included, plan to reuse or source one before setting toe, and have an alignment shop check the setting afterward.
What’s included
Not included: the adjuster sleeve and the pitman arm tie rod end.









