Overview
The Omix-Ada 18054.01 is a front tie rod assembly that runs from the pitman arm to the steering knuckle, made for narrow track axles. It fits the 1972–1983 Jeep CJ5, the 1976–1981 Jeep CJ7 and the 1981 Jeep Scrambler, and it is a direct fit.
Key features
- Pitman arm to steering knuckle connection
- Designed for narrow track axles
- Front position
- Direct fit listing for three Jeep models
Pitman arm connections
This tie rod runs from the pitman arm to the steering knuckle, so the pitman arm’s condition matters as much as the tie rod end itself. Play at the pitman arm end can feel like a worn tie rod, so check both before replacing parts. Pitman-arm style links are common on narrow track Jeep steering setups.
Changing one end of the linkage shifts the toe setting, so a front alignment should follow installation. Clean the tapered stud before fitting the new joint and check the nut and cotter pin at each end. Keep the old assembly for comparison until the new one is confirmed to clear nearby parts.
- Check the pitman arm for play
- Clean tapered studs before fitting
- Recheck toe after a short test drive
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18054.01 |
| UPC | 57071403493 |
| Part type | Tie rod assembly |
| Position | Front |
| Connection | Pitman arm to steering knuckle |
| Axle type | Narrow track |
Vehicle fitment
It fits the 1972–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1976–1981 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Renegade) and the 1981 Jeep Scrambler (Base).
Fitment covers the model years and trims shown above. Check your year, model and trim against them before ordering.
Installation notes
Because one end attaches to the pitman arm, have toe and steering alignment checked after installation.
What’s included
One front tie rod assembly is included, and nothing else comes in the package.









