Overview
The Crown Automotive J3176846 is a dipstick tube sold under part number J3176846. Crown Automotive makes and distributes replacement parts for Jeep vehicles, and this tube is universal fit.
Confirm the tube matches your Jeep’s engine and model year before installing.
Checking the dipstick tube seal
The dipstick tube guides the dipstick into the engine oil pan, giving a reliable oil level reading and keeping the stick away from moving parts. Over time the tube can crack, loosen or leak at its seal, and a damaged tube can let oil or dirt escape near the crankcase. Inspect the tube and the O-ring or gasket where it meets the block whenever the engine is opened up for other work.
When choosing a replacement, match the tube’s length and bend to the engine it will sit in, since universal parts may need careful comparison. Look at the mounting point, the seal at the block and the position of the dipstick handle, and compare them with the part you are removing. Replacing the seal at the same time is a common practice when the tube comes out.
After installation, check for leaks at the seal and confirm the dipstick reads correctly on a level surface once the engine has run and cooled. Recheck the tube’s fastener once after the first few heat cycles.
- Check the tube length and bend against your engine
- Replace the seal when the tube is removed
- Recheck the oil level after the first drive
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3176846 |
| UPC | 848399058345 |
| Part type | Dipstick tube |
Vehicle fitment
This tube is universal fit. Confirm it matches your engine before buying.
Confirm your vehicle’s year, model and trim before ordering.









