Overview
The Crown Automotive 52088251AB is a steering stabilizer for the 1999-2004 Jeep Grand Cherokee (WJ). It is a stabilizer-only replacement sold as a single unit, and it is a direct fit.
A steering stabilizer, also called a steering damper, controls side-to-side movement in the steering linkage, which helps keep the front end steady. This unit includes bushings. The shock boot and brackets are not included.
Key features
- Single stabilizer unit for the WJ Grand Cherokee steering linkage
- Stabilizer-only type, sold without a shock boot or brackets
- Bushings included
- Direct-fit replacement from Crown Automotive’s Replacement series
- Designed to limit steering wear.
Bushings and the WJ steering linkage
The WJ Grand Cherokee’s steering linkage uses a stabilizer to control side-to-side movement, and its bushings are the parts most likely to wear first. When bushings soften or crack, the stabilizer can move more than intended, which shows up as steering wander and a loose feel near center. A stabilizer with bushings included gives a fresh set at the mounting points, but the surrounding hardware still needs checking.
Because brackets are not included, the existing bracket and mounting hardware should be inspected before fitting. Corroded bolts, elongated holes or bent brackets can compromise even a new unit, so replace what is worn during the same job.
- Inspect the tie rod ends and drag link for play
- Check the front wheel bearings for roughness
- Use new fasteners where the old ones are corroded
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52088251AB |
| UPC | 848399039214 |
| Type | Stabilizer only |
| Configuration | Single |
| Fitment | Direct fit |
| Series | Replacement |
| Included | Bushings |
| Shock boot | Not included |
| Brackets | Not included |
Vehicle fitment
It fits the 1999-2004 Jeep Grand Cherokee (WJ), covering the Laredo, Limited, Overland, Special Edition and Sport trims.
It does not cover other Grand Cherokee generations or other Jeep models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because brackets are not included, check the mounting hardware on your vehicle before installation. Steering components should be inspected for wear and fitted by a qualified technician.
What’s included
One steering stabilizer unit with bushings.
Not included: Shock boot and brackets.









