Overview
The Crown Automotive 4797769 is a plastic Dana 30 inner axle dust shield for the 1996 Jeep Cherokee XJ, the 1990–1992 Comanche, the 1993–1996 Grand Cherokee ZJ and the 1990–1995 Wrangler YJ. The part number is also CRO4797769.
It is a Dana 30 inner axle dust shield made of plastic. Dana 30 is the front axle name. Crown Automotive has been a Jeep replacement parts maker for over 50 years, with over 8,000 part numbers, including many factory-discontinued items.
The shield is designed for the inner end of a Dana 30 axle. Confirm the build date of your vehicle against the year ranges below before ordering.
Key features
- Dana 30 inner axle dust shield
- Plastic construction
- Direct fit replacement part
- Fits Cherokee XJ, Comanche, Grand Cherokee ZJ and Wrangler YJ models
Checking the axle before fitting
An inner axle dust shield sits near the differential and keeps road debris, water and splash away from the inner axle joint and its seal. Because it is exposed to stones and heat, cracks and broken mounting tabs are common. A shield that has been bent during axle service may also sit wrong and rub on the shaft.
Before fitting a replacement, confirm the axle is a Dana 30 by checking the axle code or housing markings. Older Jeeps can have had front axles swapped, so the model name alone is not a reliable guide. Inspect the inner seal at the same time, since a damaged seal lets grease leak and grit reach the joint.
- Check the axle housing markings before ordering
- Inspect the inner axle seal while the shield is off
- Look for cracks at the mounting tabs
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4797769 |
| UPC | 848399008838 |
| Product type | Inner axle dust shield |
| Alternate part number | CRO4797769 |
| Axle | Dana 30 |
| Material | Plastic |
| Fit type | Direct fit |
Vehicle fitment
It fits four Jeep models with a Dana 30 front axle.
- 1996 Jeep Cherokee (XJ) (Classic, Country, SE, Sport)
- 1990–1992 Jeep Comanche (Base, Eliminator, Pioneer)
- 1993–1996 Jeep Grand Cherokee (ZJ) (Base, Laredo, Limited, Orvis, SE)
- 1990–1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara)
Fit is limited to the years shown: 1996 for the Cherokee (XJ), 1990–1992 for the Comanche, 1993–1996 for the Grand Cherokee (ZJ) and 1990–1995 for the Wrangler (YJ). Match your model, year and trim to these ranges before ordering.
Installation notes
Crown Automotive gives no installation steps. Because the shield is for the Dana 30 inner axle, confirm that your vehicle has a Dana 30 front axle as well as matching the year list.
What’s included
One plastic Dana 30 inner axle dust shield.












