Overview
The Crown Automotive clutch cable (part number J8122225) is a replacement clutch cable that measures 74 inch long with its boot. It is noted for AMC V8 engines.
It fits the 1972–1975 Jeep CJ5 (Base, Renegade) and CJ6 (Base), so owners of those models can compare the cable length before fitting.
Key features
- Clutch cable measuring 74 inch long with boot
- Noted for AMC V8 engines
- Fits 1972–1975 CJ5 and CJ6 models
- Part number J8122225 with UPC 848399067071
Adjusting clutch travel
A clutch cable carries pedal movement to the release lever, so its length and routing decide how the pedal feels and where the clutch engages. A cable that is too short or kinked can keep the clutch from fully releasing, while one that is too long can leave the pedal with little reserve. Adjust the clutch after the new cable is seated so the release point and free travel match the pedal you had before.
Inspect the boot and the cable jacket at every service. Look for cracks, flattened sections, or grease that has drifted out of the boot, since moisture and grit reach the inner wire through those openings. Pulling the cable by hand along its path also helps reveal sticky spots before they become a pedal problem on the trail.
- Check the cable end fittings for wear at the pedal and release lever
- Replace pivot bushings if the pedal feels loose
- Keep the routing clear of exhaust heat and sharp edges
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8122225 |
| UPC | 848399067071 |
| Part type | Clutch cable |
| Length with boot | 74 inch |
| Engine applications | AMC V8 engines |
Vehicle fitment
It fits the 1972–1975 Jeep CJ5 (Base, Renegade) and 1972–1975 Jeep CJ6 (Base).
CJ7 and Scrambler models are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the boot seats fully at both ends and that the cable routes freely before setting clutch adjustment.
What’s included
This item is one clutch cable with boot.
Not included: clutch pedal, linkage arm and mounting hardware are not part of this item.









