Overview
The Omix-Ada 16919.15 is an inner return spring for the clutch fork. It fits 1972 to 1975 Jeep CJ5 (Base, Renegade) and CJ6 (Base) models with 6 and 8 cylinder engines.
An inner return spring sits inside the clutch fork assembly and brings the fork back after it moves. Compare the spring’s length and rate with your old spring before installing.
Key features
- Clutch fork inner return spring
- Fits 6 and 8 cylinder engines
- Direct OE replacement built to original specifications
- Omix-Ada part number 16919.15
How the return spring works
A clutch fork return spring keeps the fork in its rest position between uses. Without a steady return force, the fork can drift, which makes the release feel inconsistent and can make the pedal hard to modulate. The spring works with the fork pivot, the release bearing and the linkage, so the parts it touches should be judged together rather than in isolation. Keep that in mind when inspecting other clutch fork parts.
When inspecting the spring, look for a shortened or flattened coil, rust that has reduced the coil cross section, and any cracking near the ends. Check that the fork moves freely on its pivot and that the spring is seated in its bore or pocket. Replacing the spring while the clutch is apart is an easy time to inspect the pivot and fork bushings for wear.
- Check for a weak or flattened coil
- Look for rust at the coil ends
- Confirm the fork pivot moves freely
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16919.15 |
| UPC | 804314024239 |
| Part type | Clutch fork inner return spring |
| Engine | 6 and 8 cylinder engines |
| Fit type | Direct fit |
Vehicle fitment
It fits these models:
- 1972-1975 Jeep CJ5 (Base, Renegade)
- 1972-1975 Jeep CJ6 (Base)
It does not fit the CJ7 or Scrambler, and it does not cover years after 1975.
Confirm your vehicle’s year, model and trim before ordering.














