Overview
The Crown Automotive A754 is a brake shoe eccentric for 9 inch brakes on the 1941–1942 Willys MB and the 1946–1953 Willys CJ-2 and CJ-3. Two are required for each wheel.
The eccentric is the adjuster that sets the brake shoe clearance against the drum.
Key features
- Brake shoe eccentric for 9 inch brakes
- Two required per wheel
- Direct-fit early Willys application
Setting brake shoe clearance
A brake shoe eccentric is a cam-style adjuster that moves the shoe closer to or further from the drum. Turning it changes the clearance, which affects pedal height and how evenly the shoes contact the drum. On older drum brakes like these, clearance is usually set with the drum installed and the wheel off the ground, then fine-tuned until the drag is even from side to side and the wheel turns freely.
Eccentrics are often replaced together with the shoes, springs and adjusters when a brake job is done. Look for seized or worn eccentrics that will not turn freely, and for rust on the pivot where the shoe sits. Work on one wheel at a time, keep the parts in order, and check that both sides of the axle are set the same way. Clean the adjuster threads and apply a light coat of anti-seize before refitting.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | A754 |
| UPC | 848399050455 |
| Product type | Brake shoe eccentric |
| Brake size | 9 inch |
| Quantity per wheel | 2 required |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1946–1949 Willys CJ-2, the 1949–1953 Willys CJ-3 and the 1941–1942 Willys MB.
Later CJ-5 and CJ-6 models are not on the A754 list. Confirm your vehicle’s year, model and trim before ordering.









