Overview
The Crown Automotive J0339372 is a long U-bolt nut for 7/16 inch threaded U-bolts on Willys and early Jeep CJ models. It is a replacement nut for the U-bolt assembly on those vehicles, and the manufacturer fitment list covers models from 1941 to 1975.
Listed applications include the 1941–1942 Willys MB, Willys CJ-2, CJ-3, CJ-5 and CJ-6 models from 1946 to 1958, the 1947–1955 Willys 1-Ton, the 1951 Willys Sedan Delivery and 1955 Willys Utility Wagon, the 1959–1975 Jeep CJ3, CJ5 and CJ6, and the 1967–1973 Commando. Some entries cover a single model year, so compare your year with the list.
Key features
- Long nut design
- Threads for 7/16 inch threaded U-bolts
- Covers Willys and early Jeep CJ applications
- Direct fit for the Willys and early Jeep CJ models covered here.
Matching the U-bolt thread
A long nut sits on the threaded end of a U-bolt and carries the clamp load. The thread has to match exactly, so a nut that runs on cleanly by hand is a good sign, while one that binds or cross-threads should be checked again before it is tightened. Compare the nut with the U-bolt you are removing, not just its label.
Old nuts on Willys and early CJ axles often rust in place. Soak the threads with penetrating oil before removing them, and clean the threads with a wire brush before fitting the new nut. Tighten in stages across both sides of the axle so the clamp pulls evenly. Recheck the nuts after the first drives, especially on rough trails where the clamp can loosen.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0339372 |
| UPC | 848399051582 |
| Thread size | 7/16 inch (for threaded U-bolts) |
| Nut style | Long nut |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers 1941–1942 Willys MB, 1946–1949 Willys CJ-2, 1949–1952 and 1954–1958 Willys CJ-3, 1955–1958 Willys CJ-5, 1956–1958 Willys CJ-6, 1947–1955 Willys 1-Ton, 1951 Willys Sedan Delivery, 1955 Willys Utility Wagon, 1959 Jeep CJ3, 1959–1975 Jeep CJ5, 1959–1968 Jeep CJ6, and 1967–1973 Jeep Commando.
The list does not include the Jeep CJ7 or the Wrangler YJ, TJ or JK models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the U-bolt thread is 7/16 inch before fitting, since this nut only threads onto that size.
What’s included
The item is a single long nut.
Not included: the U-bolts and plates the nut fastens are not part of this item.









