Select your vehicle

Omix-ADA Interior Rear View Mirror Mounting Kit – 11021.02

Omix-Ada

Shop Jeep Wrangler JK Rear View Mirrors on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Interior rear view mirror mounting kit from Omix-Ada, part 11021.02
  • Includes cleaner, adhesive and mounting pad
  • Built to original equipment specifications and uses existing mounting holes
  • Fits CJ, Scrambler, LJ, TJ and JK Wrangler models

Description

Overview

The Omix-Ada Interior Rear View Mirror Mounting Kit, part number 11021.02, is an interior mounting kit for rear view mirrors on Jeep CJ, Scrambler and Wrangler models. Omix-Ada says its mirror parts use existing mounting holes and hardware.

The listed years run from 1972 to 2018 across the CJ5, CJ6, CJ7, Scrambler, Wrangler LJ, Wrangler TJ and Wrangler JK. The CJ and Scrambler entries account for the oldest vehicles on the list.

Key features

  • Kit includes cleaner, adhesive and a mounting pad
  • Uses the existing mounting holes and hardware
  • Built to original equipment specifications
  • The CJ mirror arms come with bushings.

Mounting surface prep

Older Jeep models often have mounting holes and hardware that have been replaced, painted or reused over decades, so inspect the points before attaching the pad. Remove rust, paint flakes and old sealant, and check that the bracket sits flat without forcing it. If a hole has been enlarged or its threads are stripped, repair it before mounting the mirror.

Adhesive pads need a clean and dry surface, and cold or damp conditions can slow the cure. Keep the pad away from fingers and dust until it is fully set. A mirror that moves when pulled gently should be remounted rather than tightened further, since over-tightening can crack the mount.

  • Clear rust and paint from mounting points
  • Repair stripped threads before mounting
  • Keep the pad clean while it cures
  • Do not overtighten the mirror arm

Specifications

Brand Omix-Ada
Part number 11021.02
UPC 804314039691
Kit contents Cleaner, adhesive and mounting pad
CJ mirror arms Come with bushings

Vehicle fitment

It fits 1972–1983 CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), 1972–1975 CJ6, 1976–1986 CJ7, 1981–1985 Scrambler, 2004–2006 Wrangler LJ, 1997–2006 Wrangler TJ and 2007–2018 Wrangler JK.

The 1987–1995 Wrangler YJ and the Wrangler JL are not on the list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The kit reuses the vehicle’s existing mounting holes and hardware. Inspect those mounting points before attaching the mounting pad.

What’s included

The kit includes cleaner, adhesive and a mounting pad.

SKU: OAI11021.02 Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 15.00 × 3.00 × 1.00 in
brands

Fitment

VehicleYearsTrims
Jeep CJ51972–1983Base, Golden Eagle, Laredo, Limited, Renegade
Jeep CJ61972–1975Base
Jeep CJ71976–1986Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade
Jeep Scrambler1981–1985Base, Laredo, Renegade, SL, SR
Jeep Wrangler (JK)2007–201870th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X
Jeep Wrangler (LJ)2004–2006Unlimited, Unlimited Rubicon
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Omix-Ada 11021.02 fit a 1990 Jeep Wrangler YJ?

No. It does not fit the 1987–1995 Wrangler YJ. The Wrangler years covered are 1997–2006 TJ, 2004–2006 LJ and 2007–2018 JK. Check your year, model and trim before installing.

What comes in the mounting kit?

The kit includes cleaner, adhesive and a mounting pad. CJ mirror arms come with bushings, so CJ owners should confirm those parts are present when they open the box.

Does this kit need new mounting holes?

No new holes are needed. The mirror mounts through the existing mounting holes and hardware. Inspect your vehicle's mounting points before installing the mounting pad.

Can I use a different adhesive instead of the included one?

Use the adhesive that comes in the kit when you can. If you choose another, pick one made for glass and automotive bonding, and test it on a small area first to confirm it holds to both the pad and the glass.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Rear View Mirrors on Amazon