Overview
The Omix-ADA Control Arm Bushing, part number 18280.03, is a black rubber bushing for the front upper control arm of the 1984 to 1990 Jeep Cherokee XJ. It is a direct OE replacement built to original specifications and installs in the front upper forward position.
The bushing carries a limited five year manufacturer warranty. Confirm the warranty terms before buying, including what coverage applies.
A front upper control arm bushing lets the arm pivot as the suspension moves. When it wears, the arm can move more than it should and the front end can feel loose. An OE style replacement restores the original pivot, which is why a like-for-like bushing is the usual choice.
The bushing installs at the front upper forward position. Confirm the side of the arm before ordering.
Key features
- Direct OE replacement, built to original specifications
- Black rubber bushing
- Front upper forward position
- Limited five year manufacturer warranty
- Fits 1984 to 1990 Cherokee XJ as a direct replacement
Signs the old bushing has worn
On an XJ, the upper control arm bushing sits where the arm meets the frame bracket and handles braking and steering loads. As rubber ages it can crack, flatten or pull away from the metal sleeve, letting the arm shift. The result is often a wandering steering feel, wheel alignment that drifts quickly, or a clunk over bumps.
Before replacing it, inspect the arm, the frame bracket and the pivot bolt. Corrosion in the bracket can keep a new bushing from seating properly, and a bent arm will wear the new part unevenly. Many owners replace both front upper bushings together so the arm sits level on each side. After installation, check alignment because arm geometry affects tire wear.
- Look for cracks or separation in the rubber
- Inspect the frame bracket for rust
- Replace both sides together when one is worn
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18280.03 |
| Position | Front upper forward |
| Material | Rubber |
| Color | Black |
| Warranty | Limited five year manufacturer |
| Fit | Direct fit |
Vehicle fitment
It fits 1984 to 1990 Jeep Cherokee (XJ) models, including Base, Chief, Laredo, Limited, Pioneer and Sport trims.
Later XJ years from 1991 onward, and other Jeep models, are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pressing out the old bushing is usually required, so plan the work with that in mind. Check the arm bore for wear before the new bushing goes in.
What’s included
The black OE replacement bushing.









