Overview
The ARB OME80PR05 is a rear polyurethane fitting kit, 5 mm, for 80 Series models. It sits between the coil and the body, absorbing contact that would otherwise cause squeaking and clunking.
Fitment is given only as 80 Series, with no model years, so confirm the exact vehicle with the manufacturer before ordering.
Key features
- Polyurethane isolator for the rear coil position
- Fits 80 Series models
- Size 5 mm
- Part number OME80PR05 with UPC 9332018002181
Rear isolators in daily use
A rear isolator takes repeated contact from the coil each time the axle cycles over bumps, so it wears faster on trucks that run rough roads. Polyurethane handles that contact well, but it still flattens or cracks with age. Checking it during routine service keeps the rear end quiet and prevents metal from contacting metal at the spring seat.
When replacing a rear isolator, the springs, bump stops and rear shocks are worth inspecting in the same job. A worn shock or a tired spring can produce the same clunk the isolator was meant to stop. Clean the seat, check the body mount for rust, and make sure the isolator sits flat before the coil is set in place.
- Inspect the rear isolator after rough trail use
- Check bump stops for cracks or compression
- Re-check mounting hardware after the first few drives
Specifications
| Brand | ARB 4×4 Accessories (Old Man Emu) |
|---|---|
| Part number | OME80PR05 |
| UPC | 9332018002181 |
| Position | Rear |
| Size | 5 mm |
| Material | Polyurethane |
| Type | Coil spring fitting kit |
Vehicle fitment
Its fit covers 80 Series models only. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear coil spring fitting kit.





