Overview
The ARB 2881 is an Old Man Emu coil spring, part number 2881, with UPC 9319092023004. Confirm fit for your vehicle’s year, model and trim before ordering.
Each Old Man Emu coil is shaped for the vehicle it is sold for, taking account of that vehicle’s load capacity. The handling and control of the vehicle under load are the design priorities.
Key features
- Direct fit labeling without a named model
- Shaped for the vehicle it is sold for
- Part number 2881 with UPC 9319092023004
Swap checklist
A coil swap goes more smoothly with a short checklist. Start by confirming the vehicle, then compare the new spring’s part number and UPC with the old one. Mark the position on each corner so the right coil goes back in the right place.
Support the axle or the lower control arm safely before removing the old coil, and keep the shock and brake lines clear of the work area. Once the spring is seated, lower the vehicle and check the ride height on both sides.
Finish with an alignment and a headlight aim check, then drive the truck gently for the first few miles to listen for rubbing or new noise.
- Confirm the vehicle before buying
- Mark each corner’s position
- Check ride height on both sides
Specifications
| Brand | ARB 4×4 Accessories (Old Man Emu) |
|---|---|
| Part number | 2881 |
| UPC | 9319092023004 |
| Type | Coil spring |
Vehicle fitment
Old Man Emu coils are shaped for the vehicle they are sold for. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Swapping a coil spring changes ride height and the front or rear geometry that depends on it. Have alignment and headlight aim checked after the new spring is installed.
Confirm the vehicle’s year, model and trim before buying the spring, since fit depends on the specific truck.



