Overview
The Centerforce II KCFT193890 is a clutch kit for 1987–1993 Jeep Cherokee (XJ), 1987–1992 Jeep Comanche, 1993 Jeep Grand Cherokee (ZJ), 1987–1990 Jeep Wagoneer (SJ) and 1987–1993 Jeep Wrangler (YJ) models. It suits selected street and strip, off-road and towing applications.
The Centerforce II series uses a full facing disc with premium friction material and a pressure plate with centrifugal weights where applicable. Centerforce says its patented machining processes increase the static clamp load, which it links to holding power and clutch life.
Key features
- Full facing disc with premium friction material
- Pressure plate with centrifugal weights where applicable
- Higher static clamp load from patented machining
- Suited to selected street/strip, off-road and towing applications
- Torque figures calculated with a Centerforce I or II clutch disc
Before you install
Clutch pedal feel depends on the release system as much as the clutch itself. Hydraulic or cable linkage that sticks or has air in it can make a new clutch feel heavy or engage too high, even when the parts are correct. Bleed the hydraulic system after any line work and check the cable or slave cylinder for smooth travel. A pedal that returns fully is a good sign the release system is working.
Full facing discs are common on older Jeep drivetrains, and they tend to grab evenly across the face. Trail and towing use place extra heat and load on the clutch, so drivers should avoid riding the pedal and let the clutch fully engage before accelerating. Clean the flywheel face, check the pilot bearing, and replace the throwout bearing when it is worn.
- Inspect the flywheel for heat cracks before installing
- Replace the pilot bearing during the job
- Confirm the release fork moves freely
- Bleed the hydraulic system after line work
Specifications
| Brand | Centerforce |
|---|---|
| Part number | KCFT193890 |
| Series | Centerforce II |
| Disc type | Full facing |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1987–1993 Jeep Cherokee (XJ), the 1987–1992 Jeep Comanche, the 1993 Jeep Grand Cherokee (ZJ), the 1987–1990 Jeep Wagoneer (SJ) and the 1987–1993 Jeep Wrangler (YJ).
Cherokee models after 1993, Grand Cherokee models other than the 1993 ZJ, and Wrangler TJ models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Centerforce calculates the torque figures for its Centerforce II pressure plates with a Centerforce I or II clutch disc, so check the figures against the disc being installed.
What’s included
Kit contents vary by application. On some applications the pressure plate and disc are sold separately.







