Overview
The California Super Trucks CSS-C2-12 is a Uniball upper control arm kit for the front upper tube position. It uses a 17-4 stainless pin and a large taper.
This kit has no vehicle, model or years attached. Match your truck’s year, model and trim to the kit before buying.
Key features
- Uniball upper control arm design
- 17-4 stainless pin
- Large taper
Upper arm joints and wear
An upper control arm links the axle or knuckle to the frame and sets the upper side of the suspension geometry. A uniball joint uses a spherical bearing instead of a rubber bushing, which allows more articulation and less flex under load. That is why these arms are often chosen for trucks that work off road, though the joint still needs regular attention.
Uniball joints wear when grit gets past the seals or when they run dry. Look for play at the joint, clicking or binding at full steering lock, and torn boots. Replacing the upper arms also changes caster and camber, so plan an alignment afterward. Lower control arms, track bar and tie-rod ends are often checked at the same time, since they carry the same loads.
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSS-C2-12 |
| UPC | 700007934711 |
| Position | Front |
| Tube type | Upper |
| Pin material | 17-4 stainless |
| Taper | Large |
Vehicle fitment
Fit depends on your vehicle’s year, model and trim, so verify those before ordering. Measure the existing upper control arm’s length and pin before removing it.
What’s included
The kit is an upper control arm kit. Check the package contents against your installation before starting.








