Overview
California Super Trucks makes the CSB-C14-9, a 3 in. lift block kit with a bump stop mount. Lift blocks are spacers placed between the axle and the spring to add ride height, and this kit delivers a 3 in. lift.
Before ordering, compare the kit with your vehicle’s year, model and trim.
Key features
- 3 in. lift height
- Bump stop mount included
- Lift block kit format
- Part number CSB-C14-9 from California Super Trucks
Choosing a lift height
Lift blocks sit between the axle and the leaf springs, raising the axle without changing the spring rates. A 3 in. block changes suspension geometry more than a small spacer, so the shocks, brake lines and driveshaft angles are worth reviewing before the lift goes in. Plan for these checks as part of the job, not as an afterthought.
The bump stop mount included with this kit works with the axle to limit travel at full compression. After installation, check that the mount clears the axle housing and that the bump stop still reaches its contact point. Many owners also replace or extend the shocks when they add a lift of this size, so budget for that alongside the blocks.
- Inspect U-bolts and spring pads after the first few drives
- Re-torque axle hardware after the initial trail runs
- Look for stretched brake lines at full droop
- Have alignment and driveline angles rechecked after installation
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSB-C14-9 |
| UPC | 70000700619 |
| Lift height | 3 in. |
| Mount | Bump stop mount included |
Vehicle fitment
No vehicle fitment is given for this kit. Compare your year, model and trim against the lift before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lift blocks change suspension geometry, so have driveline angles and alignment checked after the 3 in. lift is installed.
What’s included
The kit is a lift block set with a bump stop mount. Check the package contents against your installation before starting.









