Overview
The Bushwacker 30037-02 is a pair of OE style front fender flares for the Toyota Tundra. They are designed to look like factory trim while adding a small amount of tire coverage against road debris. They are made from Dura-Flex 2000 and install without drilling.
The flares can stay in the original matte black finish for a blackout look, or they can be painted to match or accent the body color. The fit and finish are intended to look like original equipment, and the material is UV protected so it resists chalking.
Key features
- OE style design for the front position
- Adds up to three-quarters of an inch of tire coverage from debris
- Installs with no drilling required
- Matte black finish that can be left as-is or painted
- 100 percent UV protected Dura-Flex 2000 that resists chalking
- Limited lifetime warranty from Bushwacker
Choosing front flares
Front flares sit ahead of the front wheels, where steering movement and the bumper line both affect clearance. Before mounting, turn the wheels to full lock and watch how the flare edge sits relative to the tire sidewall. Check that the front tire does not touch the flare or the inner liner at full compression. Trucks with a lift or larger tires often need a second look, because added height changes the angle of the flare to the tire.
Painting or leaving the flare in matte black is mostly a matter of look, but the surface should be cleaned with mild soap and dried before any paint is applied. Keep the flare edge free of grit so road debris does not wear through the finish over time. A quick inspection after a season of off-road use helps catch loose fasteners or small cracks early.
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 30037-02 |
| UPC | 90689117137 |
| Position | Front |
| Tire coverage | three-quarters of an inch |
| Quantity | Sold as a pair |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | Matte black, paintable |
Vehicle fitment
These front flares are made for the Toyota Tundra. Confirm fit for your vehicle’s year, model and trim before ordering, especially before choosing this front pair.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The installation is drill-free and takes only minutes. Check the packing contents against your installation before starting, including whether any hardware is in the box.
What’s included
One pair of front OE style fender flares.
Not included: the rear pair (part 30038-02) and the full set (part 30917-02) are sold under separate part numbers.









