Overview
The Bushwacker 10908-07 is a pocket style fender flare set for the Jeep Wrangler TJ, with front and rear flares. Bushwacker designs it to hold oversized tires and high-clearance lift kits, and the set provides 6 in. of tire coverage. The product name identifies the TJ Wrangler, which places this set in the 1997 to 2006 range.
The flares install using the existing factory holes, so no new mounting points are needed. Decorative recessed stainless steel hardware is included. The OEM-style matte black finish is UV protected and can be left black or painted to match the body.
The pocket design uses recessed bolts with decorative stainless steel hardware, so the fasteners are part of the look. The front and rear flares are sold as one set under part number 10908-07.
Key features
- Provides 6 in. of tire coverage
- Installs using the existing factory holes
- Decorative stainless steel hardware included
- OEM matte black finish that can be painted
- Dura-Flex 2000 TPO, UV protected
- Front and rear flares in one set
Fitting flares over larger tires
Flares cover more of the tire, but they do not add suspension travel or steering clearance by themselves. Turn the wheel fully in both directions and watch for rub at the edges of the flare. Sustained contact can wear the tire sidewall and the flare edge.
Tire width, wheel offset and lift height all shape the final clearance. A taller tire or a lift that moves the axle changes where the flare edge sits relative to the tread. Check the bump stops and shock length if you move to a larger tire, and adjust them as needed.
After trail use, look at the fasteners, the flare edges and the paint at the mounting points. Tighten any loose hardware and address cracks early so they do not spread.
- Check tire rub at full steering lock
- Inspect flare edges after rough trail runs
- Recheck fasteners after the first few drives
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10908-07 |
| UPC | 90689105905 |
| Vehicle | Jeep Wrangler TJ, 1997 to 2006 |
| Position | Front and rear |
| Sold as | Set |
| Tire coverage | 6 in. |
| Style | Pocket, with decorative stainless steel hardware |
| Finish | OEM matte black, paintable |
| Material | Dura-Flex 2000 TPO, UV protected |
| Installation | Existing factory holes, no body-side drilling |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
Based on the product name, this set is for the Jeep Wrangler TJ, 1997 to 2006. The JK and the JL Wrangler are not covered, since their fender and mounting shapes differ.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flares mount in the existing factory holes, with no body-side drilling required.
What’s included
A front and rear set of pocket style flares, with the decorative stainless steel hardware.





















