Overview
The Bushwacker OE Style color matching fender flare set, part 50917-65, is a front and rear set of four flares in Granite Crystal Metallic. The flares add up to half an inch of tire coverage from debris and add clearance for trucks and SUVs, while protecting the body from dirt and debris. The set is made for the 2016 to 2018 Ram 2500 and Ram 3500.
The flares are pre-finished to match the paint, so no separate painting step is needed. The edge trim and stainless steel hardware come already installed, so the flares go on with a secure fit and no drilling. They are made in the USA from Dura-Flex 2000, a warp-resistant material tailored for each application.
Key features
- Granite Crystal Metallic finish that is pre-applied at the factory
- Up to half an inch of tire coverage from debris
- Edge trim and stainless steel hardware pre-installed
- No drilling required for a secure fit
- 100% UV protected Dura-Flex 2000 that Bushwacker describes as warp-resistant
- Made in the USA
Heavy-duty truck body care
Heavy-duty pickups carry larger tires and often sit on more lift than a half-ton, so the flare has more work to do. Road spray and gravel hit the lower part of the fender at speed, and a flare that covers that area helps keep the paint clean. Metallic finishes show dust and fine scratches differently than solid colors, so a regular wash routine keeps the flare looking even with the rest of the body.
When adding flares to a heavy-duty truck, check the clearance between the tire and the flare at ride height and during turns. Loaded beds and towing can shift the body slightly, so confirm the fit again after the first few tows. Tire wear and alignment changes can also move the tire toward the edge of the flare over time.
- Check tire clearance at ride height and in turns
- Recheck fit after the first few tows
- Wash metallic finishes with mild soap
- Watch the tire edge for rubbing wear
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 50917-65 |
| UPC | 700008511821 |
| Position | Front and rear |
| Quantity | Set of 4 |
| Width and coverage | Half an inch |
| Finish | Granite Crystal Metallic, pre-finished |
| Material | Dura-Flex 2000 |
| Hardware | Stainless steel, pre-installed with edge trim |
| Fitment type | Direct fit |
Vehicle fitment
This set is made for the 2016 to 2018 Ram 2500 and the 2016 to 2018 Ram 3500, including the Big Horn, Laramie, Limited, SLT and Tradesman models of those years.
The list does not include the 2016 to 2018 Ram 1500 or the earlier Ram 2500 and 3500 generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flares arrive with edge trim and hardware already installed, so the job is mostly positioning them and checking the fit at each wheel opening. Look at the finish in daylight against the truck before mounting, because the color is pre-applied.
What’s included
Four pre-finished OE Style flares, front and rear, in Granite Crystal Metallic, with edge trim and stainless steel hardware already installed.














