Overview
The Bushwacker 50029-02 is a pair of pocket style front fender flares for the Dodge Ram. The flares add 3 inches of width and tire coverage at the front, meant for oversized tires and high-clearance lift kits. The design is custom-built for the Ram.
The pocket style flare sits against the body and holds on with recessed stainless steel bolts. The install needs only minimal drilling. The Dura-Flex 2000 material is made in the USA, is UV protected and will not chalk. The OEM-style matte black finish can be painted to match the body or accent it.
Key features
- Pocket style design for the front position
- 3 inches of width and tire coverage
- Recessed stainless steel bolts for a bolt-on appearance
- Minimal drilling required for installation
- 100 percent UV protected Dura-Flex 2000
- OEM-style matte black finish that is easy to paint
Oversized tire fit
Oversized tires push the tread toward the front flare edge, especially when the steering turns. A three-inch flare adds room, but the tire still has to clear the inner fender, the bumper and any steering components when the wheel turns to full lock.
Choosing a tire size is the first step. Wider tires on a taller setup may need a different wheel offset, and a lift changes the angle the tire sits at. Work through the complete setup so the flare, tire and suspension are checked as one system.
After installation, drive slowly, turn the wheel in both directions and watch for rub marks on the flare. Recheck the hardware after the first few drives, since new flares can settle as the bolts seat.
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 50029-02 |
| UPC | 90689111944 |
| Position | Front |
| Width and tire coverage | 3 inches |
| Quantity | Sold as a pair |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
Vehicle fitment
The flares are made for the Dodge Ram. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install needs minimal drilling. Compare the mounting points with your truck before drilling any hole.
What’s included
One pair of pocket style front fender flares. The rear pair is part 50030-02 and the set is part 50908-02.
Not included: the rear pair (50030-02) and the set (50908-02) are sold separately.









