Overview
The Bushwacker Extend-A-Fender flare set, part 10903-11, is a front and rear set of four flares for the Jeep Wrangler YJ. The set is built to cover oversized off-road tires and provides 6 inches of tire coverage. It fits the 1987 to 1995 Jeep Wrangler YJ, including the Base, Islander, Laredo, Rio Grande, S, SE, Sahara and Sport models.
The flares are made from the Dura-Flex 2000 material that Bushwacker describes as designed for added durability and flexibility, with built-in UV protection. The brand says they resist chalking, cracking and warping. The OEM-style matte black finish can be left as is, or the flares can be painted for a personalized look that matches the rest of the Jeep.
Key features
- Set of four flares covering the front and rear of the YJ
- 6 inches of tire coverage for oversized tires
- Designed to resist chalking, cracking and warping
- 100% UV protected Dura-Flex 2000 material
- OEM matte black finish, or a custom paint color
- Drilling is required for installation; trimming is optional for extra tire clearance
Drilling and trimming plan
An extend-a-fender set changes how the body and tires fit together, so the drilling step deserves planning before any holes are made. Mark each hole position with the flares held in place, and confirm the wheel openings are clear before drilling the first one.
Trimming is a separate decision. Trim only if the tire rubs after the flares are mounted, and trim in small steps so the edge can be checked each time. Cut edges should be smoothed and sealed to limit rust, especially on older body panels.
After the set is on, check the clearance at full steering lock and at full suspension travel. Tighten all fasteners, and recheck them after the first few drives, since new holes can settle as the hardware seats.
- Mark drill positions with the flares held in place
- Trim in small steps only if needed
- Seal cut edges and drilled holes
- Recheck fasteners after the first drives
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10903-11 |
| UPC | 90689103628 |
| Position | Front and rear |
| Quantity | Set of 4 |
| Width and coverage | 6 inches |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1987 to 1995 Jeep Wrangler YJ, including the Base, Islander, Laredo, Rio Grande, S, SE, Sahara and Sport models in those years.
The list covers the YJ generation only, so the 1997 to 2006 Wrangler TJ and the 2007 to 2018 Wrangler JK are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required for installation, and trimming is optional if more tire clearance is needed. Plan for the drilling before mounting the flares, and check the clearance at full steering lock once they are on.
What’s included
A set of four Extend-A-Fender flares, front and rear, in the OEM matte black finish.












