Overview
The Bushwacker 31927-02 is a set of four pocket style fender flares, titled for the Toyota Tacoma. The flares cover the front and rear wheel openings and add 2 inches of width and tire coverage for oversized tires. Bushwacker describes them as a bolt-on upgrade made from its Dura-Flex 2000 material.
The surface is OEM-style matte black, UV protected and paintable to match the body color. The flares are made in the USA from thick, warp-resistant Dura-Flex 2000. The vehicle this set is built for is not settled, so confirm fit for your year, model and trim before ordering.
Key features
- Pocket style design with recessed bolts and a bolt-on look
- 2 inches of width and tire coverage at the front and rear
- Minimal drilling required for installation
- Dura-Flex 2000 material with UV protection to resist chalking
- OEM-style matte black finish that is easy to paint
- Made in the USA
Confirming the right vehicle
When a flare set does not clearly match one vehicle, the fit should be settled before any hardware is bought. Start with the year, model and trim printed on your registration or door sticker, then compare the flare mounting points and overall width with your own fenders. A set that is close in size but built for a different body can leave gaps at the edge or sit too far from the tire.
Pocket style flares rely on the fender shape at the mount, so the lip and the bolt locations matter more than the flare color or finish. Measure the wheel opening from the center of the hub to the top of the fender, and mark the planned holes with tape. A short check now avoids drilling into the wrong body panel and needing to patch paint later.
- Note your exact year, model and trim
- Compare fender lip shape before drilling
- Use a flexible plastic primer before any paint work
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 31927-02 |
| UPC | 9068911614 |
| Position | Front and rear |
| Width and tire coverage | 2 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
Vehicle fitment
This set is associated with both a Toyota Tacoma and a Jeep Wrangler, and no model years are set for either, so fit cannot be settled yet. Mounting points should be matched to your own truck before the set is chosen.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install needs minimal drilling. Because the vehicle is unsettled, check the mounting points against your own truck before drilling any holes.
What’s included
One set of four pocket style fender flares for the front and rear positions.
















