Overview
The Bushwacker 10030-07 is a pocket style rear fender flare pair for the Jeep Wrangler TJ, 1997 to 2006. It is made to hold oversized tires and high-clearance lift kits, and it adds up to 6.00 in. of tire coverage against debris. The flares are sold as a rear pair only, so front coverage needs the separate front pair, part 10029-07.
The flares install with no body-side drilling, using factory-style mounting. The OEM matte black finish is UV protected so it will not chalk, and it can be painted to match or accent the body. The flares are formed from Dura-Flex 2000 TPO.
Pocket style rear flares use recessed stainless steel bolts to keep a bolt-on look. The 6.00 in. of coverage suits a Wrangler running larger tires and wheels. Front coverage requires the front pair, 10029-07, or the full set, 10908-07.
Key features
- Adds up to 6.00 in. of tire coverage against debris
- Rear pair only, sold as a pair
- No body-side drilling needed for installation
- OEM matte black finish that can be painted
- Dura-Flex 2000 TPO, 100% UV protected
- Made in the USA, with a Limited Lifetime Warranty
Trail use and tire fit
TJ rear wheel wells collect mud and grit, and pocket style flares help keep spray off the body and the rear door area. Because the flare sits close to the tire, the wider coverage is most useful when the tires are larger than stock or the suspension has been raised. Check the fender liner and the inside of the flare after the first few drives, looking for scuffs that show the tire is contacting the edge.
Painted flares need care to keep the finish intact. Wash with mild soap, avoid harsh solvents on the textured surface, and touch up any chips before they spread. When swapping tires or wheels on a TJ, recheck the clearance at full steering lock and on a long rough drive, since small changes in tire width can alter how close the tread comes to the flare.
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10030-07 |
| UPC | 9068911209 |
| Vehicle | Jeep Wrangler TJ, 1997 to 2006 |
| Position | Rear |
| Sold as | Pair |
| Front pair part number | 10029-07 |
| Set part number | 10908-07 |
| Tire coverage | Up to 6.00 in. |
| Style | Pocket, with recessed stainless steel bolts |
| Finish | OEM matte black, paintable |
| Material | Dura-Flex 2000 TPO, 100% UV protected |
| Installation | No body-side drilling |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
Based on the product name, these rear flares are for the Jeep Wrangler TJ, 1997 to 2006. They are not written for the JK or JL Wrangler, which have different fender and mounting shapes.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A rear pair of pocket style flares with the recessed stainless steel hardware. Front flares are not included.








