Overview
The Bushwacker 60001-01 is an Extend-A-Fender front flare pair for the International Scout II. It is intended for a Scout running oversize wheels and tires, and it adds up to 1.50 in. of tire coverage against road debris. Confirm fit for your Scout’s year and body before ordering.
The flares need minimal drilling and install in minutes. The OEM matte black smooth finish is easy to paint, and the Dura-Flex 2000 material is UV protected to resist chalking, cracking and warping. The flares are made in the USA.
Extend-A-Fender flares extend the factory fender line to cover oversize tires, and the Dura-Flex 2000 material is UV protected for outdoor use. The rear pair, 60002-01, is sold separately.
Key features
- Adds up to 1.50 in. of tire coverage against road debris
- Front flares sold as a pair
- Installs in minutes with minimal drilling
- OEM matte black smooth finish, easy to paint
- Dura-Flex 2000 material, 100% UV protected
- Made in the USA, with a Limited Lifetime Warranty
Fitting oversize tires
Extend-A-Fender flares are built to carry the fender line out over wider tires, which helps when a Scout runs oversize wheels. The trade-off is that the wider tire also changes steering clearance, suspension travel and the way the tire sits under the flare. Before fitting, check how far the tire can turn and how it moves through full suspension travel.
Plan the rest of the build around the flares. Wheel offset, tire width and spring height all affect whether the tire rubs the flare edge or the inner fender. Make a test fit with the wheels mounted, and recheck after the first few drives on uneven ground, since flex can shift the fit.
- Check steering lock with the new tires
- Test fit before final mounting
- Recheck fit after uneven ground use
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 60001-01 |
| UPC | 90689101099 |
| Vehicle | International Scout II (model years not stated) |
| Position | Front |
| Sold as | Pair |
| Rear pair part number | 60002-01 |
| Tire coverage | Up to 1.50 in. |
| Finish | OEM matte black, smooth, paintable |
| Material | Dura-Flex 2000, 100% UV protected |
| Installation | Minimal drilling |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
This flare pair is for the International Scout II. Confirm fit for your Scout’s year and body before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushwacker calls for minimal drilling on this set. Mark the mounting points before you start, and keep the rear pair (60002-01) matched to the same build.
What’s included
A front pair of Extend-A-Fender flares. The rear pair is sold separately under part number 60002-01.









