Overview
The Bushwacker Pocket Style Front Fender Flares, part number B/W50065-02, are a front pair of black, recessed-bolt fender flares for the 2019–2026 Ram 2500 and Ram 3500. Listed fitment includes the Big Horn, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Power Wagon and Tradesman trims on the 2500, and the same trims on the 3500 except Power Wagon.
Pocket Style flares are custom designed for each vehicle to complement oversized tires and high-clearance lift kits. Bushwacker describes them as its original off-road flare. The recessed stainless steel bolts give the hard-core look of bolt-on flares without drilling into body-side sheet metal, and the matte black finish is UV protected so it will not chalk.
Flares can be mounted as they arrive or painted to match or accent the body color for a factory-custom look. They are made in the USA from thick, warp-resistant Dura-Flex 2000 material, built for added durability and flexibility on the trail.
Key features
- Recessed stainless steel bolts for a bolt-on look
- No body-side sheet metal drilling required
- Designed to complement oversized tires and high-clearance lift kits
- Made in the USA from Dura-Flex 2000 material
- Warp-resistant and UV protected, so the finish will not chalk
- Matte black OEM-style finish that can be painted
- Width/Coverage of 2 Inches, sold as a front pair
Tire size and lift planning
Flares built for oversized tires work best when the tire size and lift height are planned together. A taller tire or higher ride height moves the tire relative to the flare, so measure the gap at full steering lock and over bumps. Recessed bolt flares give a clean edge, but they cannot make up for a tire that sits too far outward.
Front suspension and steering parts can contact a larger tire, so inspect control arms, brake lines and the inner fender area after the new tires are mounted. Small changes to the flare position may be needed to keep an even gap along the edge.
Over time, check the recessed bolts and the flare edges for shifting, especially after rough trail runs. Replace any cracked mounting points before they allow the flare to move.
- Measure tire gap at full steering lock
- Inspect brake lines after lift changes
- Recheck recessed bolts after trail runs
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | B/W50065-02 |
| Style | Pocket / Rivet Style |
| Quantity | Sold as a pair |
| Location | Front |
| Position | Front |
| Color | Black (matte black, paintable) |
| Fitment type | Direct fit |
| Width/Coverage | 2 Inches |
| Material | Dura-Flex 2000 |
| Fasteners | Recessed stainless steel bolts |
| Made in | USA |
Vehicle fitment
Listed fitment for this pair: 2019–2026 Ram 2500 (Big Horn, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Power Wagon, Tradesman) and 2019–2026 Ram 3500 (Big Horn, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Tradesman).
Power Wagon is not covered for the Ram 3500. Ram 1500 models and years outside 2019–2026 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flares mount without drilling into body-side sheet metal. Since they are designed around oversized tires and lift kits, check your tire size and lift setup against the coverage before final assembly.
What’s included
A front pair of Pocket Style fender flares.









