Overview
The Bushwacker Pocket Style fender flare set, part 10913-07, is a front and rear set of four flares for the Jeep Wrangler TJ. The pocket style uses recessed stainless steel bolts, and the set provides 6 inches of tire coverage from debris. It is custom designed to complement oversized tires and high-clearance lift kits. The TJ chassis code covers the 1997 to 2006 model years.
The flares are made in the USA from Bushwacker’s thick Dura-Flex 2000 TPO, a material made to be warp-resistant and flexible. The set comes with stainless steel hardware and installs in the factory holes with only minimal body-side drilling. The OEM matte black finish can be kept as is or painted to match or accent the body color.
Key features
- Bold pocket design with recessed stainless steel bolts
- 6 inches of tire coverage from debris at the front and rear
- Installs in the factory holes with minimal body-side drilling
- Complete set with stainless steel hardware
- Part of a EURO Rubicon conversion package
- Dura-Flex 2000 TPO that Bushwacker describes as warp-resistant and flexible
Setting up a TJ set
A four-piece pocket flare set changes the space around both axles, so front and rear clearance should be checked together. The tire position changes at full steering lock on the front and at full suspension travel on the rear, and each end needs its own test.
Factory mounting holes keep the install simple, but they do not guarantee clearance on every setup. Tire size, wheel offset and suspension height all matter, so confirm fit after mounting rather than assuming the set will clear.
Painting is a common step with a set like this. Clean and scuff the flare surface, use a flexible primer for plastic, and let the finish cure fully before rough trail use. A good finish helps the set keep its look in mud and salt.
- Check front clearance at full steering lock
- Check rear clearance at full suspension travel
- Confirm fit after any tire or wheel change
- Prime and cure paint before trail use
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10913-07 |
| UPC | 90689107060 |
| Position | Front and rear |
| Quantity | Set of 4 |
| Width and coverage | 6 inches |
| Material | Dura-Flex 2000 TPO |
| Finish | OEM matte black, or paint to match the body |
| Hardware | Stainless steel, included |
| Origin | Made in the USA |
Vehicle fitment
This set is for the 1997 to 2006 Jeep Wrangler TJ, covered by the TJ chassis code.
The TJ is a different generation from the Wrangler YJ, the Wrangler JK and the Wrangler JL, and those models are outside these years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flares install in the factory holes with minimal body-side drilling, so most of the work is mounting the hardware and checking the flare against each tire. Check the clearance at full steering lock after mounting, because the 6 inches of added coverage changes the space above the tire.
What’s included
A set of four Pocket Style flares for the front and rear, with stainless steel hardware. It is part of a EURO Rubicon conversion package.













