Overview
The Bushwacker 10055-07 is a flat style front fender flare pair for the Jeep Wrangler TJ, built to maximize tire coverage and wheel articulation for off-road use. The flares add up to 6 in. of coverage against debris, and the flexible Dura-Flex 2000 TPO is designed to absorb impact. The product name identifies the TJ Wrangler, which is covered in the fitment section below.
Bushwacker’s mounting brackets bolt straight onto the Jeep, and the flares fit alongside the factory rocker guards. A DOT-compliant LED side marker light and a fully molded wheel well guard are included in the design. The OEM textured black finish is UV protected to stop chalking, and it can be painted if you want a custom look.
Flat style flares present a smooth, flush panel over the tire, and the design is made to absorb impact. The front pair is sold on its own and includes a DOT side marker light.
Key features
- Adds up to 6 in. of tire coverage against debris
- Flat style design built to absorb impact
- Mounting brackets bolt straight to the Jeep
- Integrates with the factory rocker guards
- DOT-compliant LED side marker light and fully molded wheel well protection
- OEM textured black finish, 100% UV protected
Trail use and clearance
Front flares do most of their work on the trail, where tires flex over rocks, ruts and brush. A flat panel sheds mud and debris better than a tight factory opening, but the gap between the tire and the flare still needs to be checked at full compression. Flexing suspension can bring the tire closer to the edge, so look at the fit with the truck loaded and the wheel turned.
Flexible TPO handles impacts better than rigid plastic, but edges can still crack if they are bent hard against a rock. Rinse out packed mud around the brackets after rough trips, since trapped grit wears paint and fasteners. Keep the flare edges clean so you can see fresh cracks or stress marks early.
- Check clearance at full compression
- Rinse mud from bracket areas
- Inspect edges after rocky trails
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10055-07 |
| UPC | 90689112187 |
| Position | Front |
| Sold as | Pair |
| Tire coverage | Up to 6 in. |
| Lighting | DOT-compliant LED side marker light |
| Finish | OEM textured black, paintable |
| Material | Dura-Flex 2000 TPO, 100% UV protected |
| Installation | No drilling |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
Based on the product name, these front flares are for the Jeep Wrangler TJ, 1997 to 2006. They are not written for the JK or the JL Wrangler, which have different fender shapes and mounting points.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation calls for minimal extra tools and bodywork. Follow the installation guide for this specific Jeep, which covers the bracket mounting, before trimming any factory sheet metal.
What’s included
A front pair of flat style flares, including the DOT-compliant LED side marker light. No rear flares are part of this set.








