Select your vehicle

Bushwacker Rear Pocket Style Fender Flares – 20106-02

Bushwacker

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Bushwacker Rear Pocket Style fender flares, part B/W20106-02
  • Fits 2017–2022 Ford F-250 and F-350 Super Duty
  • Riveted, bolt-on design; no drilling on most applications
  • Dura-Flex construction, 100% UV-resistant

Description

Overview

The Bushwacker Rear Pocket Style Fender Flares, part number B/W20106-02, are riveted rear fender flares for the 2017–2022 Ford F-250 Super Duty and F-350 Super Duty. They add tire coverage at the rear of the truck with a bolt-on design that, for most applications, mounts with no drilling or cutting.

The flares are made from Dura-Flex material, which is 100% UV-resistant and flexible enough to handle summer sun, winter cold and salted streets. The large decorative bolts give the truck a tough look that suits work trucks and off-road rigs.

Key features

  • Riveted, bolt-on pocket style design
  • Mounts with no drilling or cutting on most applications
  • Dura-Flex material with 100% UV resistance
  • Resists sun, cold and road salt
  • Large decorative bolts for a tough appearance
  • Built for extra tire coverage on work and off-road trucks

Before the first drive

Riveted and bolt-on flares depend on the fasteners to stay in place, so the first drive is a good time to confirm everything is secure. Look at each mounting point, check that the flare edges sit even along the fender, and make sure nothing touches the tire at full lock. Small adjustments made early prevent rattles and wear later.

Heavy-duty trucks carry extra weight and often run larger tires, which puts more load on the fender area. Check the flares after rough roads, towing, and off-road runs. Look for cracks near the holes, loose rivets, or paint transfer that shows contact. Replacing a worn fastener is usually simpler than repairing a damaged flare edge.

  • Check fasteners after the first drives
  • Inspect for contact with the tire at full lock
  • Retighten after rough terrain

Specifications

Brand Bushwacker
Part number B/W20106-02
Position Rear
Material Dura-Flex (100% UV-resistant)
Attachment Riveted, bolt-on
Fitment type Direct fit

Vehicle fitment

Bushwacker lists these flares for the 2017–2022 Ford F-250 Super Duty and 2017–2022 Ford F-350 Super Duty in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims.

Other Super Duty model years are not covered. Confirm fit for your truck’s year, model and trim before ordering.

Installation notes

Most applications bolt right in with no drilling or cutting. Because the flares are riveted and bolted on, make sure every fastener is fully seated and tight before driving the truck.

What’s included

The set consists of the rear flares. Check the package contents against your installation before starting.

SKU: B/W20106-02 Categories: ,

Fitment

VehicleYearsTrims
Ford F-250 Super Duty2017–2022King Ranch, Lariat, Limited, Platinum, XL, XLT
Ford F-350 Super Duty2017–2022King Ranch, Lariat, Limited, Platinum, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bushwacker B/W20106-02 fit a Ford F-250 or F-350 Super Duty?

It fits the 2017–2022 Ford F-250 Super Duty and F-350 Super Duty in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims. Other Super Duty model years are not covered, so confirm your year and trim before ordering.

Does installation require drilling or cutting?

For most applications, no. The riveted, bolt-on flares bolt right into place without drilling or cutting. Because mounting depends on your truck, check the fit before fully tightening the fasteners.

What is the Dura-Flex material on these flares?

Dura-Flex is the material used for these riveted rear flares. It is 100% UV-resistant and flexible, handling summer sun, winter cold and salted streets, and it is tough enough for work trucks and off-road use.

What is the part number for these rear flares?

The part number is B/W20106-02. These are rear-position fender flares in the Rear Pocket Style series. Measure your tire coverage against the flare before ordering.

How often should riveted flares be checked?

Check the fasteners after the first drives, then at regular service intervals. Loose rivets or bolts can let the flare shift, so retighten them and inspect for cracks near the mounting holes.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon