Overview
The Bushwacker Cut-Out Style rear fender flare pair, part 20022-11, is made for the Ford Bronco and F-Series trucks. Each Cut-Out set is built to free up off-road wheel travel while keeping tire coverage. This pair adds 3.75 inches of width and tire coverage at the rear and fits the 1992 to 1997 model years.
Full articulation and coverage for oversized tires depend on cutting the body sheet metal. The design gives a smoother appearance and greater strength than a bolt-on flare, and it uses stainless steel hardware for a bolt-on installation. The pair is made from thick, warp-proof Dura-Flex 2000 TPO, and the matte black finish can be left as is or custom painted.
Key features
- Individually designed for the listed Ford models
- 3.75 inches of width and tire coverage at the rear
- Sheet metal removal maximizes wheel articulation
- Stainless steel hardware for an easier bolt-on installation
- Warp-proof Dura-Flex 2000 TPO construction
- OEM matte black finish that can be custom painted
Measuring before you cut
Cut-out rear flares work best when the cut is measured from fixed points on the body. Use the wheel center, the bottom of the door and a level line to mark the cut, then check tire fit at full compression. A cut is hard to reverse, so make the first cut conservative and remove more metal only if the tire still rubs.
Stainless steel hardware helps the flare hold up to moisture and road salt. Check the hardware and the riveted or bolted points after rough use. Tighten the hardware evenly, and recheck it once the flare has been driven through several cycles of suspension travel.
- Mark cuts from fixed body points
- Trim conservatively and check fit each time
- Recheck hardware after several suspension cycles
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20022-11 |
| UPC | 90689103215 |
| Position | Rear |
| Quantity | Pair |
| Width and coverage | 3.75 inches |
| Material | Dura-Flex 2000 TPO |
| Finish | OEM matte black, paintable |
| Front pair part number | 20021-11 |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1992 to 1996 Ford Bronco, 1992 to 1996 Ford F-150, 1993 to 1995 Ford F-150 Lightning, 1992 to 1996 Ford F-250, 1997 Ford F-250 HD and 1992 to 1997 Ford F-350 in those years.
The list covers the 1992 to 1997 models above only, so the Ford Super Duty trucks from 1999 on and the Bronco from 1966 to 1977 are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cut-Out flares require cutting body sheet metal at the rear wheel openings, so this is not a bolt-on-only install. Follow the installation guide for your model, and check the clearance at full suspension travel after mounting.
What’s included
The rear Cut-Out pair is the only piece in this package. The front pair is part 20021-11.









