Overview
The Bushwacker 21007-11 is a pair of cut-out front fender flares made for the Ford Bronco II and the Ranger. They are designed for each vehicle, increase off-road wheel travel and keep coverage for oversized tires.
Cut-out fender flares require cutting the body sheet metal to get maximum articulation and coverage. The cut is what delivers the added wheel travel, and the installation guide for the specific model gives the complete steps.
The flares are made from Dura-Flex 2000, a thick, warp-resistant material with UV protection against chalking. The matte black finish can be left as is or painted. The Bronco II and Ranger each need checking against their own years and installation guide. The flares are built for added durability and flexibility in severe conditions.
Key features
- Cut-out design for greater wheel articulation
- Dura-Flex 2000 material with UV protection
- Matte black finish, paintable
- Rivet installation
Before cutting and fitting
Cutting body sheet metal is a permanent step, so measure twice and mark the cut lines with the wheel turned fully to each side. Check that the flare clears the tire at full steering lock and at full suspension compression, since those are the points where contact happens first. Trim only what the layout requires.
Rivets are the fastening method, so drill the holes slowly and deburr them to protect the paint. Seal exposed cut edges with a body-safe primer to slow rust, and check the rivets after the first few off-road runs. Wider tires may need more clearance than the stock opening provides, so review tire size before starting the work.
- Mark cut lines with the wheel turned
- Check clearance at full steering lock
- Seal cut edges with primer
- Recheck rivets after the first trail runs
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 21007-11 |
| Position | Front |
| Width or coverage | 3.25 in |
| Quantity | Pair |
| Finish | OEM matte black, paintable |
Vehicle fitment
These flares are made for the Ford Bronco II and Ranger. Confirm the model year and body style against the installation guide before ordering.
Confirm the model year and body style before cutting any sheet metal, and check tire coverage for the size you plan to run.
Installation notes
Installation requires cutting body sheet metal, so the installation guide for the specific model should be followed before any cut is made. Check the tire coverage for the size you plan to run.
What’s included
A pair of front cut-out fender flares.
Not included: rivets, tools and the paint, if the flares are painted.








