Overview
The Bushwacker 50038-02 is a pair of pocket style rear fender flares for the Dodge Ram. The flares add 2.5 inches of width and tire coverage at the rear. Bushwacker says they are custom-designed for the Ram to complement oversized tires and high-clearance lift kits, but no model years are given for this part number.
The recessed stainless steel bolts hold the pocket style flare against the body. The material is Dura-Flex 2000, which is thick, flexible and warp-resistant. The surface is UV protected so it will not chalk, and the matte black finish can be painted for a factory-custom look. The flares are made in the USA.
Key features
- Pocket style design for the rear position
- 2.5 inches of width and tire coverage
- Installs with no drilling required
- Recessed stainless steel bolts for a secure bolt-on look
- 100 percent UV protected Dura-Flex 2000
- OEM-style matte black finish that is easy to paint
Rear clearance under load
Rear flares see the most movement when the bed is loaded or the truck is carrying gear over rough ground. The rear axle rises and falls with the springs, so the tire can shift toward the flare edge in ways that do not show when the truck is parked.
Plan the clearance around the tire you intend to run. A larger tire, a wheel with less backspacing or a change in ride height can all reduce the gap, so confirm the fit with the setup you plan to drive.
Inspect the pocket flares and their recessed bolts after trail use. Look for scuffs on the inner edge, loose hardware and any cracking near the mounts, since those signs point to the tire contacting the flare.
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 50038-02 |
| UPC | 90689111876 |
| Position | Rear |
| Width and tire coverage | 2.5 inches |
| Quantity | Sold as a pair |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
Vehicle fitment
The rear flares are made for the Dodge Ram. Confirm fit for your vehicle’s year, model and trim before ordering, including whether your truck is a 1500 or a heavy-duty model.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install is drill-free and uses the recessed bolts. Check the rear tire clearance once the pair is mounted.
What’s included
One pair of pocket style rear fender flares.
Not included: the front pair (part 50037-02 or 50047-02) and the set (part 50915-02 or 50919-02) are listed separately.









