Overview
The Bushwacker Flat Style rear flare pair, part 10052-07, is made for 2-door Jeep Wrangler JK models from 2007 to 2018. It adds up to 9.5 inches of tire coverage from debris and is built to improve tire coverage and wheel articulation for off-road use.
The flares are molded from Dura-Flex 2000 TPO, a material known for flexibility and thickness. They provide OE-level tire coverage, and the fully molded design covers exposed wheel well sheet metal. The pair works with the factory inner splash guard to help protect engine components.
Key features
- 2-door Wrangler JK rear flare with a flat style profile
- Adds up to 9.5 inches of tire coverage from debris
- No-drill installation
- Fully molded design covers the exposed wheel well sheet metal
- Works with the factory inner splash guard
- OEM matte black smooth finish
Fit checks before the first drive
Bolt-on fender flares are easy to mount, but a quick check before the first drive prevents rubbing and wind noise. Confirm that each flare sits evenly along the wheel opening, that the fasteners are snug, and that the edges are not pressed against the body. Recheck the flare clearance after any tire change, since a different tire width or height can change where the edge sits.
Road spray and trail mud collect along flare edges, so rinse the wheel wells after off-road outings. Mild soap and water are usually enough, and a soft brush helps clear packed debris. Periodic checks of the clips and brackets help catch loosening early, especially after rough terrain.
- Confirm even spacing along each flare
- Re-check flare clearance after tire changes
- Rinse wheel wells after muddy trips
- Check clips and brackets periodically
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10052-07 |
| UPC | 90689112354 |
| Position | Rear |
| Quantity | Pair |
| Width and coverage | 9.5 inches |
| Material | Dura-Flex 2000 TPO |
| Finish | OEM matte black smooth |
| Fitment type | Direct fit |
Vehicle fitment
The rear pair fits 2007 to 2018 Jeep Wrangler JK models, including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims in those years.
The list covers the JK generation only, so the Wrangler TJ, YJ and JL and the Cherokee are not included. The pair is for 2-door models, so check the body style before installing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pair is designed to install with no drilling, and the mounting brackets bolt straight onto the Jeep. Because the fully molded design covers the wheel well sheet metal, check the fit against the inner splash guard before tightening the hardware. The design integrates neatly with the factory rocker guards and incorporates DOT-compliant LED side marker lights.
What’s included
A pair of rear Flat Style flares in the OEM matte black smooth finish.












