Overview
The Bushwacker Pocket Style Fender Flares are a set of four paintable pocket-style flares for the front and rear. The tire coverage is 1.38 inches at the front and 1.50 inches at the rear, and the width/coverage is 1.50 inches.
Key features
- Pocket style
- Front and rear set of four
- Front tire coverage 1.38 inches
- Rear tire coverage 1.50 inches
- Paintable
Checking fit and coverage
Pocket-style flares fit into the gap between the fender and the tire, and their coverage depends on how the tire sits in the wheel well. Before buying, measure the distance from the tire’s outer edge to the fender lip. That measurement shows whether the coverage for the set will protect the lower panel in your conditions.
Front and rear flares often need to be checked as a pair. A front flare may clear easily while the rear is tighter because of suspension travel or a different wheel offset. Check both sides at full steering lock and when the suspension is loaded, and use the same care for each end of the vehicle.
Painting flares is straightforward but needs preparation. Clean the surface, sand lightly, apply a flexible primer, and use paint that moves with the plastic. Keep paint thin, and check the edges after the first washes for chipping. Mounting hardware and the fender edge are also worth inspecting when flares come off for service.
- Measure the tire-to-fender-lip gap before buying
- Check front and rear clearance at full lock
- Prepare the surface before painting
- Inspect the fender edge when flares are removed
Specifications
| Brand | Bushwacker |
|---|---|
| UPC | 90689119490 |
| Style | Pocket style |
| Quantity | Set of 4 |
| Position | Front and rear |
| Tire coverage | Front 1.38 inches; rear 1.50 inches |
| Finish | Paintable |
Vehicle fitment
Match the vehicle, model and year to this set before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A set of four pocket-style fender flares for the front and rear.








