Overview
The Bushwacker Chevrolet Extend-A-Fender flare set, part 40911-02, is a front and rear set of four fender flares for the Chevrolet Tahoe. The flares add tire coverage for oversized off-road tires and install with no drilling. This set adds 1.5 inches of width to the fender line.
The flares are molded from Dura-Flex 2000, a material designed for durability and flexibility, with built-in UV protection. They are designed to resist chalking, cracking and warping, whether left in the OEM-style matte black finish or painted for a custom look.
Key features
- Set of four flares for the front and rear of the Tahoe
- 1.5 inches of width and tire coverage
- No drilling required for installation
- UV-protected Dura-Flex 2000 material
- Designed to resist chalking, cracking and warping.
- OEM-style matte black smooth finish that accepts paint
Tahoe fender work and paint
Tahoe flares sit over the wheel openings and are fitted to the fender edge, so the mounting surface matters more than the flare itself. Clean the fender edge before fitting, and set the flare in place with the wheel turned to each side to see how it sits. The fit should look even along the fender, with no gaps or pinched areas where the flare meets the body.
If you plan to paint the flares, do it before installation. Painting after mounting can leave overspray on the fender and the surrounding body panel. Once painted, let the finish cure fully before handling or fitting the flares, so the finish is not marked during installation.
- Clean the fender edge before fitting
- Check the fit with the wheel turned both ways
- Paint and cure before installation
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40911-02 |
| UPC | 90689105776 |
| Position | Front and rear |
| Quantity | Set of 4 |
| Width and coverage | 1.5 inches |
| Material | Dura-Flex 2000 |
| Finish | OEM-style matte black smooth, paintable |
| Fitment type | Direct fit |
Vehicle fitment
This set fits the 2000 to 2006 Chevrolet Tahoe, including the Base, LS, LT, Limited and Z71 models in those years.
Confirm fit for other Chevrolet or GMC models, such as the Suburban, Silverado, Blazer or Yukon, against your vehicle’s year, model and trim before ordering.
Installation notes
Because the flares install with no drilling, the work is mainly fitting the flares to the fender and checking clearance at the tire. If you plan to paint them, do it before installation so the finish is not handled after it cures.
What’s included
Four Extend-A-Fender flares for the front and rear of the Tahoe, in the OEM-style matte black finish.









