Overview
The Bushwacker Cut-Out Style front fender flare pair, part 10057-07, is made for the Jeep Wrangler YJ. Each Cut-Out set is individually designed for the vehicle to maximize off-road wheel travel while keeping adequate tire coverage. This pair adds 6 inches of tire coverage from debris at the front, and the YJ chassis code covers the 1987 to 1995 model years.
Cut-Out flares require cutting body sheet metal to reach maximum articulation and coverage for oversized tires. The result is a smoother appearance and greater strength than a bolt-on flare. The pair is molded from thick, warp-proof Dura-Flex 2000 TPO, a proprietary material with UV protection that guards against chalking. The pro-grade matte black finish looks good as is, or it can be custom painted.
Key features
- Individually designed for the Jeep Wrangler YJ
- 6 inches of tire coverage from debris at the front
- Sheet metal removal maximizes wheel articulation
- Tough stainless steel hardware for an easier bolt-on installation
- 100% UV protected Dura-Flex 2000 TPO that guards against chalking
- OEM matte black finish that can be painted
Cutting and clearance tips
Cut-out flares trade a bolt-on install for more usable wheel travel. Once the sheet metal is opened at the front wheel openings, the tire can move through its full range without rubbing the fender. The benefit grows when the vehicle runs a larger tire than stock, because a bigger tire needs more room at full compression and full steering lock.
Before cutting, tape the outline, test it against the tire at both lock positions, and cut slowly. Smooth or deburr each cut edge so it does not catch on the tire or on wiring. Prime the bare metal soon after cutting, since exposed steel rusts quickly in wheel wells that collect mud and road salt.
After installation, recheck the flare once the first few trail runs are done. Look for loose fasteners, fresh rub marks on the tire sidewall and any gap that has opened at the cut edge. Careful cutting and regular checks help a cut-out install last as long as the rest of the body.
- Tape the cut line and test it at full lock
- Deburr edges before mounting
- Prime bare metal the same day
- Recheck fasteners after rough trail runs
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10057-07 |
| UPC | 90689112101 |
| Position | Front |
| Quantity | Pair |
| Width and coverage | 6 inches |
| Material | Dura-Flex 2000 TPO |
| Finish | OEM matte black, paintable |
| Rear pair part number | 10058-07 |
| Set part number | 10909-07 |
Vehicle fitment
This front pair is for the 1987 to 1995 Jeep Wrangler YJ, covered by the YJ chassis code.
The YJ is a different generation from the Wrangler TJ, JK and JL, and those models are not covered by this pair. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cut-Out flares require cutting the sheet metal at the front wheel openings, so this is not a bolt-on-only installation. Follow the installation guide for the YJ and check the flare clearance at full steering lock after mounting.
What’s included
A pair of front Cut-Out flares. The rear pair is part 10058-07, and the full set part number is 10909-07.








