Overview
The Bushwacker 30917-33 is a pre-finished black set of four OE style fender flares for the 2016 to 2018 Toyota Tundra. The flares are made from Dura-Flex 2000 and add up to 0.75 inches of tire coverage from road debris at the front and rear. Bushwacker presents this version as the black option in its color matching line.
This black set comes pre-finished, so the flares are ready to install as delivered. The edge trim and stainless steel hardware are installed at the factory, which removes the need to drill during the fit. The material is made in the USA, resists warping and is UV protected. The black version uses the same pre-finished construction as the other colors in the line.
Key features
- Pre-finished black color with no paint step
- Edge trim and stainless steel hardware pre-installed
- Adds up to 0.75 inches of tire coverage from debris
- Mounting requires no drilling, since the hardware is already in place.
- 100 percent UV protected Dura-Flex 2000
- Made in the USA with a Limited Lifetime Warranty
Black finish care
A black pre-finished flare shows dust, water spots and light scuffs more readily than some lighter colors, so a regular wash keeps it looking clean. Use mild soap and water, rinse well and dry with a soft cloth. Avoid abrasive pads and harsh solvents, which can dull the surface and make small marks more visible.
Inspect the flares along the edge trim and around each stainless steel fastener after rough trail use. Tighten anything that has backed off, and check for cracks near the mounting points. Small chips can be cleaned and touched up with a suitable matching product, while deeper damage is a sign the flare should be replaced before it fails on the trail. Keeping the trim clear of mud helps the edges stay in place.
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 30917-33 |
| UPC | 700008511621 |
| Position | Front and rear |
| Tire coverage | 0.75 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | Black, pre-finished |
| Model years | 2016 to 2018 Toyota Tundra |
Vehicle fitment
Bushwacker lists fitment for the 2016 to 2018 Toyota Tundra. The list does not include 2007 to 2013 or 2014 to 2015 Tundra models, so those years need a different part.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The edge trim and hardware arrive installed, so the job comes down to mounting the set. The fit is drill-free from start to finish.
What’s included
A set of four pre-finished black flares with edge trim and stainless steel hardware already installed.











