Overview
The Bushwacker 10909-07 is a cut-out style front and rear fender flare set for the Jeep Wrangler YJ. Bushwacker designs each set for the specific vehicle to maximize off-road wheel travel and maintain tire coverage, and this one provides 6 in. of coverage against debris. The product name identifies the YJ Wrangler, which places this set in the 1987 to 1995 range.
Cut-out flares require removing sheet metal to reach full articulation for oversized tires. The cut-out design is meant for tire travel, and drilling is required for installation. Trimming is optional for extra tire clearance. The matte black finish is UV protected and can be painted to match the body.
Key features
- Provides 6 in. of tire coverage against debris
- Sheet metal removal maximizes wheel articulation
- Drilling required; trimming optional for tire clearance
- OEM matte black finish that can be painted
- Complete with stainless steel hardware
- Dura-Flex 2000 TPO, UV protected
Cut-out flare considerations
Cut-out flares trade a factory look for articulation, since the sheet metal is removed so the tire can travel farther. Once the metal is gone, the cut edges are bare and need attention, especially near the wheel well where water and road grit collect. Treat them before mounting the set to slow rust at the joint.
Choosing tires is part of the same plan. A larger tire needs more clearance at full lock and full compression, so trial fitting the flares before final drilling helps avoid surprises. Paint is best done after fitting, using a finish that matches the body and a primer suited to the flare material.
- Mark drill points carefully before cutting
- Check suspension travel after mounting
- Inspect the cut edges each season
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10909-07 |
| UPC | 90689105912 |
| Vehicle | Jeep Wrangler YJ, 1987 to 1995 |
| Position | Front and rear |
| Sold as | Set |
| Tire coverage | 6 in. |
| Style | Cut-out, sheet metal removed |
| Finish | OEM matte black, smooth, paintable |
| Material | Dura-Flex 2000 TPO, UV protected |
| Hardware | Stainless steel |
| Installation | Drilling required |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
Based on the product name, this set is for the Jeep Wrangler YJ, 1987 to 1995. It is not written for the TJ, JK or JL Wrangler, which have different body and fender shapes.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required, and trimming is optional if you need more tire clearance. Because the cut-out style removes sheet metal, follow the installation guide for your specific YJ before drilling or cutting anything.
What’s included
A front and rear set of cut-out style flares with the stainless steel hardware.
