Overview
The Bushwacker Ford F-150 Pocket Style Fender Flare Set, part number 20935-82, is four front and rear flares for the 2016-2017 Ford F-150. The set adds up to 1.5 inches of tire coverage, and the matte black finish can be left as it is or painted.
The Pocket Style design uses recessed stainless steel bolts for a bolt-on look. The flares are molded from thick, warp-resistant Dura-Flex 2000 that is UV protected so the finish will not chalk. They install with no drilling required.
Fit is limited to the 2016 and 2017 model years, so check your model year before buying. Trucks from the 2018 model year and later are not covered.
The set fits the 2016-2017 Ford F-150 in the King Ranch, Lariat, Platinum, SSV, XL and XLT trims. Trucks from 2015 and earlier are not covered.
Each of the four flares is part of one set, so the front and rear positions come together. The 1.5-inch figure is the number to compare with your tire width.
The matte black finish is OEM style and can be painted to match the body, so a painted look is possible without changing the fit.
Key features
- Set of four front and rear flares
- Up to 1.5 inches of tire coverage from debris
- Installs easily with no drilling required
- Recessed stainless steel bolts for a bolt-on look
- OEM matte black finish, easy to paint
- 100% UV protected Dura-Flex 2000, no chalking
Care and paint touch-ups
Recessed stainless steel bolts give a clean bolt-on look, but fasteners still work loose under vibration. After the first drives, check each bolt and clip for snugness, especially after rough roads. A matte finish is less forgiving than gloss, so scratches show more. Keep a small amount of matching touch-up paint on hand for small marks.
Matte black and paintable finishes both benefit from gentle cleaning. Use a soft brush and mild soap, and rinse with plenty of water. Avoid high-pressure spray directly at the edges, where water can work behind the flare. If you paint the set, wait for full cure before fitting it back onto the truck.
- Re-check bolts after the first few drives
- Inspect edges after off-road trips
- Clean the underside to clear mud and grit
- Replace cracked clips before they break
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20935-82 |
| UPC | 90689120960 |
| Quantity | Set of 4 |
| Position | Front and rear |
| Tire coverage | Up to 1.5 in |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
Vehicle fitment
It fits the 2016-2017 Ford F-150 in the King Ranch, Lariat, Platinum, SSV, XL and XLT trims.
Trucks from 2015 and earlier, and 2018 and later, are not covered, and the Ford Super Duty is not part of this fit. Confirm your model year and trim before ordering.
What’s included
A set of four Pocket Style fender flares for the front and rear positions.






