Overview
The Bushwacker Flat Style fender flare set, part 10924-07, is a front and rear set of four flares for the Jeep Wrangler YJ. Flat style flares are built to maximize tire coverage and wheel articulation for severe off-road use, and this set provides 6 inches of tire coverage. The YJ chassis code covers the 1987 to 1995 model years.
The Flat Style is designed to absorb impact. The set is molded from Dura-Flex 2000 TPO, a thick and flexible material. The flares are engineered to install with minimal extra tools and bodywork, and the mounting brackets bolt straight onto the Jeep. They integrate with the factory rocker guards and include DOT-compliant LED side marker lights and fully molded wheel well protection.
Key features
- Flat style design that maximizes tire coverage and wheel articulation
- 6 inches of tire coverage for the front and rear
- Mounting brackets bolt straight onto the Jeep
- Integrates with the factory rocker guards
- DOT-compliant LED side marker lights included
- 100% UV protected Dura-Flex 2000 TPO with an OEM matte black textured finish
Trail clearance and articulation
Fender flares cover the tire opening so that a larger tire can move up and down with the suspension without rubbing the body. Rubbing often shows up first at the rear wheel openings during full articulation, so a slow test at each corner is worth doing once the flares are on. Tire width, wheel offset and lift height all change how much room is left, so the fit should be checked with the tires you actually run.
Flares also take impacts that would otherwise reach the body panels. Inspect the mounting points after rough trails, looking for loose fasteners, cracked brackets or paint marks where the flare meets a tire. Molded plastic can flex without breaking, but repeated flexing near a bracket is where fatigue usually starts.
- Check clearance at full lock and full compression
- Re-torque brackets after the first few trail runs
- Keep the wheel well free of packed mud
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10924-07 |
| UPC | 90689114013 |
| Position | Front and rear |
| Quantity | Set of 4 |
| Width and coverage | 6 inches |
| Material | Dura-Flex 2000 TPO |
| Finish | OEM matte black textured |
| Lighting | DOT-compliant LED side marker lights |
| Origin | Made in the USA |
Vehicle fitment
This set is for the 1987 to 1995 Jeep Wrangler YJ, covered by the YJ chassis code.
The YJ is a different generation from the 1997 to 2006 Wrangler TJ and the 2007 to 2018 Wrangler JK, so those models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flares install with minimal extra tools and bodywork. Confirm fit for your vehicle’s year, model and trim before ordering, then follow the installation guide for your YJ before starting, since the brackets bolt to the body and the fit depends on the body.
What’s included
A set of four Flat Style flares, front and rear, with DOT-compliant LED side marker lights and fully molded wheel well protection.


















