Overview
The Body Armor Toyota Tundra front winch bumper in textured black, part number TN-19335, is a steel plate front bumper built to carry a winch of up to 10,000 pounds. It is designed for the Toyota Tundra.
The two-piece design makes installation easier, the high-clearance corners suit off-road driving, and the center section gives skid-plate style protection to the front of the vehicle.
Key features
- Two-piece design that Body Armor says makes installation easier
- 3/16 inch steel plate construction
- Built for a winch up to 10,000 pounds; a low-profile side control box works best.
- Large 4.5 inch light pockets for auxiliary lights
- High-clearance corners for off-road performance
- Center section gives skid-plate type protection to the front of the vehicle
- Two shackle plates as recovery points
- Dual-process textured black powder-coat finish
Front winch setup basics
A front winch bumper carries more load than a standard bumper, so the mounting points and the frame behind them matter. Before you buy, choose a winch that suits your use and confirm it fits behind the winch mount. Heavier winches draw more battery current, so consider the battery, cable gauge and a solid ground connection as part of the setup. A fairlead or roller and a rated recovery strap or line are common companions to the winch.
Front bumpers also change the balance of the front end, which can affect approach angle, radiator airflow and the weight carried by the front axle. Route auxiliary light wiring away from moving parts and secure cables so they do not rub. Inspect the winch mount, shackles and bolts after recoveries and trail use, since a sudden load can loosen fasteners or stress the plate.
- Winch size and mount fit
- Battery and cable setup
- Fairlead or roller choice
- Light wiring routed away from moving parts
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | TN-19335 |
| UPC | 859909002482 |
| Product type | Front winch bumper |
| Vehicle named | Toyota Tundra (years not listed) |
| Position | Front |
| Width | Full |
| Material | Steel plate |
| Plate thickness | 3/16 inch |
| Finish | Textured black powder coat |
| Maximum winch size | 10,000 pounds |
| Light pockets | 4.5 inch |
| Light mounts | Included |
| Winch mount | Included |
| D-ring mount | Included |
| Fitment type | Direct fit |
Vehicle fitment
Body Armor 4×4 designs this bumper for the Toyota Tundra, but no model years or generation are listed, so the exact Tundra years it covers are unknown.
Tundra generations differ from one another, so the years matter before you order. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The two-piece design makes installation easier. A winch must be fitted separately, and a low-profile side control box works best with it.
What’s included
The two-piece front bumper with its light pockets, shackle plates, winch mount and D-ring mounts.
Not included: A winch and auxiliary lights.









