Overview
The Body Armor Pro-Series Stubby Front Winch Bumper, part number JK-19536, is a 3/16 inch steel plate front bumper in textured black powder coat for two-door and four-door models.
It has an integrated front skid plate that runs down to the crash bar and an aggressive approach angle that makes steep climbs easier. An integrated shorty stinger hoop with gusset support braces adds protection, and the winch plate is 1/4″ steel. The massive recovery points tie directly to the frame, and the bumper does not require relocating the vacuum pump on newer models. Optional bumper wings widen the profile.
Key features
- Integrated front skid plate that runs down to the crash bar
- Aggressive approach angle for steep climbs
- Shorty stinger hoop with gusset support braces
- Winch plate in 1/4″ steel, with the winch mount included
- Recovery points tied directly to the frame
- No need to relocate the vacuum pump on newer models
Stubby bumper trail use
A stubby front bumper keeps the nose short, which can help with approach and departure on tight trails, but it also leaves less surface area for light mounts and gear. A shorter bumper suits trucks that spend time on rocks and ledges, where a short nose helps avoid contact with obstacles. Think about how much gear you plan to carry before choosing a stubby design.
Because the winch plate and skid plate sit low, check the underside after rough runs for dents, cracks or loose fasteners. The frame-tied recovery points spread load into the vehicle, so keep the mounting hardware tight and inspected. Consider the wings or extra lights as separate purchases if the basic profile is not enough.
- Consider how much gear you carry
- Inspect the underside after rough runs
- Keep recovery point hardware tight
- Plan any wings or lights as separate purchases
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | JK-19536 |
| UPC | 859909003700 |
| Product type | Stubby front winch bumper (Pro-Series) |
| Width | Stubby |
| Material | Steel plate, 3/16″ |
| Winch plate | 1/4″ steel |
| Finish | Textured black powder coat |
| Body styles | 2-door and 4-door models |
| Winch mount | Included |
| Light mounts | Included |
| D-ring mount | Not included |
| Optional wings, cube lights | B/AJK-19536-WC |
| Optional wings, 3″ round lights | B/A19536-WR |
Vehicle fitment
This bumper suits two-door and four-door models and newer models. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm fit for your vehicle’s year, model and trim before choosing this bumper.
Installation notes
The bumper includes the winch plate, and on newer models the vacuum pump does not need to be relocated.
What’s included
- Pro-Series Stubby front winch bumper with integrated skid plate and stinger hoop
- Winch plate
Not included: D-ring mounts, a winch and lights. The optional bumper wings are separate parts.














