Overview
The Body Armor 4×4 ECO Series front bumper, part GM-19335, is a full-width steel front bumper for the 2014–2015 Chevrolet Silverado 1500. It has a powder coat finish, and Body Armor 4×4 gives its weight as 79 pounds.
Body Armor 4×4 built the center with multiple pockets so air can reach the intercooler. The bumper has mounts for two cube LED lights in each end pocket and a center mount for a 20-inch single or dual row LED light bar.
The bumper is made from 3 mm steel plate with a dual process textured powder coat. It bolts on without drilling, cutting or welding, and it weighs 79 pounds.
Key features
- Full-width design
- Multiple center pockets for airflow to the intercooler
- Two cube LED mounts in each end pocket
- Center mount for a 20-inch LED light bar
- 3 mm steel plate
- Powder coat finish
Weight and front-end setup
A full-width steel bumper at 79 pounds shifts weight toward the front of the truck, which can affect steering feel, braking distance and tire wear. A fresh alignment after installation helps spread that load evenly. Check the front suspension bushings and ball joints during routine service, since extra mass puts more stress on those parts over time.
Light mounts are one reason people choose a bumper like this, so plan the cube light and bar positions with the bumper already on the vehicle. Keep wiring clear of the powder coat edges and use grommets where wires pass through the frame. Powder coat can chip on rocks, so keep a touch-up kit matched to the finish on hand.
- Align the front end after installation
- Inspect ball joints and bushings at service
- Keep a powder coat touch-up kit
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | GM-19335 |
| Light bar | 20-inch single or dual row, center mount |
| Cube mounts | Two per end pocket |
| Position | Front |
| Width | Full |
| Material | Steel, 3 mm plate |
| Weight | 79 pounds |
| Finish | Powder coat |
| Winch mount | Not compatible |
| Light mounts | Included |
| D-ring mount | Not included |
| Installation | Bolt-on, no drilling, cutting or welding |
Vehicle fitment
The fit covers the 2014–2015 Chevrolet Silverado 1500 only.
Years outside 2014–2015 and the Silverado 2500HD and 3500HD are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt-on, with no drilling, cutting or welding required. Winch mounting is not supported by this bumper.
The bumper is made from 3 mm steel plate with a powder coat finish. It is a front-position part with light mounts included and no D-ring mount. It weighs 79 pounds.
What’s included
Light mounts are included. Not included: the D-ring mount, and the cube lights and light bars the mounts are designed for.








