Overview
The Body Armor 4×4 ECO Series front bumper, part DG-19339, is a full-width front bumper for the 2013–2018 Ram 1500. It is made from 3 mm steel plate and painted with a dual process textured black powder coat. Body Armor 4×4 gives its weight as 79 pounds.
The center has multiple pockets designed to improve airflow to the intercooler. Each end pocket has a mount for two cube LED lights, and the center mount takes a 20-inch single or dual row LED light bar.
The bumper is a bolt-on part that needs no drilling, cutting or welding. It weighs 79 pounds.
The ECO Series front bumper is built for strength, protection and style. Its light mounts are spread across the bumper, so cube lights in the end pockets and a bar in the center can be planned together rather than added one at a time.
Key features
- Full-width design
- Multiple center pockets for intercooler airflow
- Two cube LED mounts in each end pocket
- Center mount for a 20-inch single or dual row LED bar
- 3 mm steel plate
- Dual process textured black powder coat
Planning lights and airflow
The center pockets and end mounts make room for a layered light plan. Cube lights in the end pockets can cover the lower corners of the front, while a 20-inch light bar in the center adds forward reach. Choose the light output and beam pattern before mounting so the bar sits level and does not block the grille. Route wiring through the frame with loom and grommets to keep it clear of the intercooler area.
Airflow matters with a full-width steel bumper. Keep the center pockets free of debris, check the intercooler area after washing and make sure nothing rubs the pocket edges. A heavier front end changes how the truck pitches under braking, so alignment and tire wear are worth checking after installation. Recheck light bracket bolts after rough trail use, since vibration can loosen them over time.
- Level the light bar before tightening
- Keep center pockets clear of debris
- Recheck alignment after installation
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | DG-19339 |
| Light mounting | Two cube LED mounts in each end pocket and a 20-inch single or dual row LED bar in the center |
| Fit style | Direct fit |
| Position | Front |
| Width | Full |
| Material | Steel, 3 mm plate |
| Weight | 79 pounds |
| Finish | Dual process textured black powder coat |
| Winch mount | Not compatible |
| Light mounts | Included |
| D-ring mount | Not included |
| Installation | Bolt-on, no drilling, cutting or welding |
Vehicle fitment
The fit covers the 2013–2018 Ram 1500 only. Ram 1500 model years from 2012 and earlier and from 2019 onward, along with Ram 2500 and 3500 models, are not covered. Check the year and trim against your truck before ordering.
The list does not include the Ram 2500 or 3500, or Ram 1500 model years from 2012 or earlier and from 2019 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt-on, with no drilling, cutting or welding required. The bumper is not winch mount compatible, so a winch is not mounted to it.
What’s included
Light mounts are included. Not included: the D-ring mount, and the cube lights and light bars the mounts are designed for.











