Overview
The ICON Vehicle Dynamics 66515 is a stabilizer-only unit from the Vehicle Specific 2.0 Aluminum Series. It is made for wide track 4WD Ford F-250 Super Duty trucks from 2008 through 2016 and F-350 Super Duty trucks from 2008 through 2022, and it is used in a dual steering stabilizer system.
The series suits everyday street driving and weekend off-road use. The stabilizer is nitrogen charged with a monotube design and an internal reservoir. The body and reservoir tubing is 6063 anodized aluminum, which dissipates heat well and resists corrosion.
Because the series uses vehicle specific valving, each unit is tuned for its application rather than sold as a one-size valve setup.
The shaft is 5/8-inch chrome plated hardened steel, and the piston is a one-piece linear and digressive design with vehicle specific valving. The unit uses premium 5WT shock oil and can be rebuilt and revalved.
Key features
- Nitrogen charged monotube design with an internal reservoir
- 5/8-inch chrome plated hardened steel shaft
- 6061 aluminum rod end, top cap and internals
- Polyurethane bushings, zinc plated sleeves and forged steel mounting stems
- Nitrile rubber top-out bumper, which ICON says runs noise free
- 100% rebuildable and 100% revalveable
- One-piece linear and digressive piston with vehicle specific valving
Rebuilding and retuning a stabilizer
A steering stabilizer that is rebuildable can be serviced with new seals and fresh oil, which keeps the damping consistent over time. Rebuilding is most useful when the unit has been used hard off road, since heat and debris wear the seals and the rod. A rebuildable design also lets the valving be changed when the vehicle setup changes.
Before sending a unit for service, check the mounting ends for play and the body for oil seepage. Note the adjustment and any valving details so the rebuild can match the original tune. Keep the mounts, bushings and hardware in good condition, since a fresh stabilizer will not feel right on worn mounts.
- Look for oil seepage at the shaft seal
- Check the mounting ends for play
- Inspect the bushings and hardware
- Record valving details before service
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO66515 |
| Series | Vehicle Specific 2.0 Aluminum Series |
| Type | Stabilizer only |
| Configuration | Single, for a dual steering stabilizer system |
| Body and reservoir tubing | 6063 anodized aluminum |
| Shaft | 5/8-inch chrome plated hardened steel |
| Shock oil | Premium 5WT |
| Charge | Nitrogen |
| Brackets | Not included |
| Shock boot | Not included |
Vehicle fitment
It fits the 2008–2016 Ford F-250 Super Duty and the 2008–2022 Ford F-350 Super Duty, in wide track 4WD configurations.
The list does not include the F-450 or F-550, or F-250 model years after 2016. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are not included, so the stabilizer needs a separate bracket setup. Because it is made for a dual steering stabilizer system, plan for the second stabilizer and its mounting hardware.
What’s included
The item is the stabilizer only.
Not included: brackets and the shock boot.









