Overview
The Bilstein 5100 Series shock absorber, part number 33-185576, is a gas-charged monotube shock with 16mm eye mounts at both ends. It is built for lifted trucks, Jeeps and prerunners, and is designed for lift kits that keep the stock O.E.M. mounting configuration.
Bilstein presents the 5100 Series as its traditional line, built on a single tube and a high gas pressure design. This shock has a 20.75 inch collapsed length, a 34.9 inch extended length and 14.15 inches of travel. The body is a 46mm smooth, non-coilover design with no reservoir.
Key features
- Monotube gas pressure construction
- Self-adjusting deflecting disc valving
- High-flow piston that Bilstein says reduces harshness
- Independent rebound and compression tuning
- Larger working piston area for exact damping control
- Designed for manufacturer lift kits using the stock O.E.M. mounting configuration
Before you order a replacement
A 5100 Series shock with 16mm eyes at both ends needs matching hardware on both the axle and the frame. Many replacement shocks fail to mount cleanly because bushings, bolts and sleeves differ between kits. Measure the eye diameter and thread size of the old shock before you order, so you know whether the new one will bolt straight in.
Gas charged shocks should be kept upright during storage, and the boot should be inspected when it is removed. Signs that the old shock is worn include oil on the body, a bouncy ride after rough sections, and clunking at the mounts. Replacing a shock with a worn bushing can leave play that the new shock cannot correct, so inspect the eye bushings at the same time.
- Measure eye diameter and thread size
- Check boot condition on the old shock
- Inspect eye bushings for play
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-185576 |
| UPC | 651860453743 |
| Shock series | 5100 Series |
| Collapsed length | 20.75 in |
| Extended length | 34.9 in |
| Travel length | 14.15 in |
| Lower mount | Eye 16mm |
| Upper mount | Eye 16mm |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Reservoir | No |
| Finish | Zinc plated |
| Gas charged | Yes |
| Boot included | No |
Vehicle fitment
Match the shock to your lift kit’s mounting before ordering. Make sure your year, model and make are on the right track for your lift kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both eye mounts are 16mm, so check that the hardware and bushings at each end match that size. Support the vehicle securely before removing the original shock.
What’s included
The shock absorber itself.
Not included: A boot. The shock is not supplied with one.









