Overview
The Baja Designs 20 inch OnX6+ Bumper Light Kit, part number 448050, is a bumper-mounted LED light bar for the 2021–2026 Ram 1500 TRX. It is rated at 216 watts and 24,920 lumens, and it keeps the truck’s factory look while adding light.
The kit uses the OnX6 light series with a billet machined aluminum bezel and a hard coated polycarbonate front lens. It comes with every component needed for mounting, so no extra mounting parts are required.
Baja Designs also rates the kit as IK10 compliant for mechanical impact and IP69K waterproof, submersible to 9 ft. It includes built-in overvoltage protection, and the amp draw is 16.6 with LED life listed at 49,930 hours.
Key features
- 20 inch OnX6+ bumper light bar
- 24,920 lumens and 216 watts
- IP69K waterproof, submersible to 9 ft
- IK10 compliant for mechanical impact
- Built-in overvoltage protection
- Billet machined aluminum bezel
Wiring and power draw
Light bars with high amp draw need a fused circuit and a relay so the switch carries only a small current. Fuse size should match the kit’s draw and the wire gauge. Routing matters too: keep the harness away from hot exhaust parts and moving suspension links, and secure it with clips.
Bumper lights are exposed to road debris and washing, so the bezel and seals should be checked after rough use. Sealed connectors help keep water out of the harness. A light bar should be aimed after mounting, since bumper height and suspension changes move the beam.
- Route wiring away from heat and moving parts
- Use sealed connectors at the bumper
- Aim the bar after mounting
- Check seals after rough use
Specifications
| Brand | Baja Designs |
|---|---|
| Part number | 448050 |
| Mounting location | Bumper |
| Light series | OnX6 |
| Size | 20 inch |
| Watts | 216 |
| Lumens | 24,920 |
| Amp draw | 16.6 |
| LED life expectancy | 49,930 hours |
| Front lens | Hard coated polycarbonate |
| Bezel | Billet machined aluminum |
| Waterproof rating | IP69K, submersible to 9 ft |
| Mechanical impact | IK10 compliant |
| Overvoltage protection | Built in |
| Sold as | Kit |
Vehicle fitment
The kit fits 2021–2026 Ram 1500 TRX trucks, including the TRX Launch Edition. Other Ram 1500 trims and model years, along with Ram 2500 and 3500, are not covered. Check that your vehicle’s year, model and trim match before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 16.6 amp draw should run through a fused relay rather than straight from the switch, with the fuse sized to the kit. Check your local rules on auxiliary lights before using the bar on public roads.
What’s included
One 20 inch OnX6+ bumper light kit, with the components needed for installation.











