Overview
The Baer Brakes 4301389B is a black Pro Plus front brake kit for 1960–1986 Chevrolet C10 and GMC C15 2WD trucks that run CPP 2.5 inch drop spindles and six-lug wheels. The Pro Plus is a six-piston system, and this version uses the black caliper finish of the family.
A 6P caliper in black grips a 14 inch two-piece rotor sized for a 6×5.5 inch bolt pattern. Brackets, braided hoses and hardware come with the kit, and the billet aluminum hubs include premium bearings in Redline synthetic grease. The black version pairs with the silver 4301389S and red 4301389R in the same Pro Plus line.
Key features
- Six-piston 6P caliper with a black finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons that reduce uneven pad wear
- Dual seals for dust and weather
- CNC machined caliper body from forged or billet aluminum, powder coated
- Two-piece rotor with aluminum hat, slotted, drilled and zinc plated
- Hubs with billet dust caps and premium bearings
- DOT-approved brake hoses and D0731 pad type
Spindle and bearing service
Drop spindles carry the load of the hub, bearings and brake assembly, so their condition matters as much as the brake parts. When the hubs come off, inspect the spindle for scoring at the bearing journal and for cracks around the mounting ears. A spindle with a rough bearing surface will wear new bearings quickly and can cause wobble that shows up as steering vibration.
Bearings should be repacked or replaced whenever a hub is removed, using a grease suited to wheel bearing service. Adjustment matters too: a bearing preloaded too tightly will heat up and fail early, while one left loose will knock. Check bearing play with the wheel off before reassembly. Old hub seals should be replaced rather than reused whenever the hub is taken apart.
- Inspect the spindle journal for scoring
- Replace seals whenever the hub is removed
- Set bearing preload to the service procedure
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301389B |
| UPC | 844165040835 |
| Sold as | Kit |
| Caliper | 6P, six-piston, fixed |
| Caliper color | Black |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 inch |
| Rotor construction | Two-piece, iron rotor with aluminum hat |
| Rotor style | Slotted, drilled, zinc plated, vented |
| Brake pad FMSI number | D0731 |
| Brake hose | DOT approved |
| Lug count | 6 lug |
| Wheel bolt pattern | 6×5.50 inch |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Minimum wheel diameter | 18.0 inch |
| Template | Q117P |
| Drive and axle | 2WD, front |
| Country of origin | US |
Vehicle fitment
Listed applications for the 4301389B: 1960–1986 Chevrolet C10; 1967–1986 Chevrolet C10 Suburban; 1960–1966 and 1987–1989 Chevrolet Suburban; 1966 GMC 1000; 1960–1965 GMC 1000 Series; 1975–1978 GMC C15; 1967–1974 GMC C15/C1500; and 1979–1986 GMC C1500.
Only 2WD trucks are covered, so four-wheel-drive versions are excluded. Chevrolet and GMC trucks outside the years above, other than the 1987–1989 Chevrolet Suburban, are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This kit depends on CPP 2.5 inch drop spindles, which are not part of the package. Use the Q117P template to check that the wheels clear the 14 inch rotor before the hubs go on. Brake systems are safety-critical, so a qualified technician should inspect the completed installation.
What’s included
The package covers the 14 inch two-piece rotors, 6P calipers, billet hubs with bearings, mounting brackets, braided hoses and hardware, with the rotors pre-assembled.
Not included: CPP 2.5 inch drop spindles and lug nuts.














